rda coil setup on istick 50w suggestions?

[dbrown12]

anyone have any suggestions on a good build for decent flavor and clouds on a 50w stick set on 50w? I made a dual setup at .4 ohms using 28g kanthal and i got beautiful clouds but a pretty bad burnt taste.

 

[dbrandt01]

Then turn down the watts if it's tasting burnt. Honestly, because it can do 50 watts doesn't mean you have to use all 50 of them.
I usually get pretty good taste from 28g twisted kanthal and dual coils though. Not sure of your rda, but sometimes closing airflow off instead of running it wide open help.

 

[JonasDK]

I use a 0.3 ohm dual-coil, on a mutation x. 7 wraps of 24 gauge wire, around a 2.5mm drill-bit. It works perfectly.

 

[dbrown12]

Forgot to mention i did try turning it down and it still tasted burnt

 

[Cstep82]

anyone have any suggestions on a good build for decent flavor and clouds on a 50w stick set on 50w? I made a dual setup at .4 ohms using 28g kanthal and i got beautiful clouds but a pretty bad burnt taste.

Try using 24 gauge and building a parallel coil. I'm getting a reading of a .4 oml and using the full 50w. If you have it find a build to use it. Battery will last about 2 full days blasting at 50w. Good luck

 

[Cstep82]

anyone have any suggestions on a good build for decent flavor and clouds on a 50w stick set on 50w? I made a dual setup at .4 ohms using 28g kanthal and i got beautiful clouds but a pretty bad burnt taste.

Also the 50w will only let you go to .3oml. With about 5 wraps you will get great vape.