20x1 topcap

[nuvole]

I'm buying bit and pieces to make a frankenstein mod.

RSM rocket switch
MCR-101 tube

Now what's the best option for topcap? I very much prefer simple
brushed s/s and floating pin if possible.

 

[Firestorm]

My favorite 20x1 threaded top cap is for the GP Paps v3 - it's not brushed, but it has the GPin so there is no need to adjust any pins for your atomizer or battery.

That being said, standard MCR-101 tubes have a double-threading for the top cap and won't work with a standard 20x1 threaded top cap. They do offer 20x1 threaded tubes as spares, so hopefully that's what you have if you're looking for a standard 20x1 threaded top cap.

 

[nuvole]

Thanks for your advise. I did purchase the 20x1 spare tube.
I'll be getting the GP Paps V3

 

[classwife]

Moved to APV Discussion from Ecigarette Technical Issues

 

[nuvole]

Not good... After I received my MCR-101 tube I found out that they are thread 20x1 on one end only.
They will only work with MCR switch. I email them and was told that they DO NOT sell any tube with 20x1 on both end ...>_<...

 

[Firestorm]

Right, my GP Paps switches that are 20x1 threaded don't screw on to my MCR mod and vice versa. Whoever has posted that the switches are 20x1 is wrong. MCR does post on it's website that the 20x1 tubes are for MCR switches only.

Threaded 20 x 1 single start to suit standard top caps and Hybrids

Suits MCR switch assembly’s only.