HOTCIG DNA200?

[dwcraig1]

Room temp was 70 (verified with the temperature probe on my multimeter), battery was just under half. Expect it to take 3 - 4 hours to run the case analyzer test.
I'm interested in seeing others results also.

Well my battery analyzer failed due to too low ohms so I'll run the battery down at work and proceed in the morning. It can run while I sleep, night shift for 18 years.

 

[Akuma888]

http://www.gearbest.com/temperature...utm_medium=shareasale&utm_campaign=shareasale

 

[ThunderDan]

http://www.gearbest.com/temperature...utm_medium=shareasale&utm_campaign=shareasale

VT200FR is the coupon code I saw.

 

[dwcraig1]

VT200FR is the coupon code I saw.

"Ships after Oct 30th." ....... What's up with that.

 

[ThunderDan]

"Ships after Oct 30th." ....... What's up with that.

Who knows, its gearbest. buy at your own risk as always with them. You'll get it, eventually, but who knows how long it will take.

 

[Tpat591]

Does everyone agree that this is the closest HobbyKing carries to the Fullymax Reference Battery?

http://www.hobbyking.com/hobbyking/store/uh_viewItem.asp?idProduct=59086

I always have a hard time with their site.

 

[dwcraig1]

Does everyone agree that this is the closest HobbyKing carries to the Fullymax Reference Battery?

http://www.hobbyking.com/hobbyking/store/uh_viewItem.asp?idProduct=59086

I always have a hard time with their site.

It's 25c BTW

 

[Tpat591]

It's 25c BTW

Best they had in that size range that I could find. It will supply the 23a continuous max the dna can pull, but would have preferred 30c min.

 

[dwcraig1]

Best they had in that size range that I could find. It will supply the 23a continuous max the dna can pull, but would have preferred 30c min.

I would stick with a higher C but then some may not really be what they say their rated at.
For my vaping that one would be more than robust enough. But if I were buying it would be the one Evolv sells.

 

[Tpat591]

Fair point, looking for economic alternatives while I am waiting for FT to respond.

 

[Tpat591]

What happened with your battery analyzer test? How many ohms was it looking for?

 

[dwcraig1]

What happened with your battery analyzer test? How many ohms was it looking for?

Failed to complete 'cause I stopped it 'cause of error
1 ohm is recommended.
I'm not too concerned with the battery, just wanted to discharge it enough to run case analyzer.
Here's my setup that was too low ohms, I'll try two bulbs in a series next time.

http://evolvapor.forumchitchat.com/post/show_single_post?pid=1289460227&postcount=32
EDIT: I can't read, ohms were too HIGH

 

[Akuma888]

"Ships after Oct 30th." ....... What's up with that.

Maybe they are waiting for the SS revision then ship together...."Wishful thinking!" lol

 

[Akuma888]

Sorry, let's move to VT200 threads or else we will be barred for trolling.

 

[dwcraig1]

Maybe they are waiting for the SS revision then ship together...."Wishful thinking!" lol

Just what I was thinking a couple of minutes ago when looking at it on GB site with it's brass one pictured. I suspect it will be ss.

 

[Lorenzo Morchio]

Did you find some spare battery?

 

[Natrium83]

I got my shipment in with 10 DX200 and 10 extra batteries today. I must say after some issues that were resolved through upgrading the firmware and charging the lipo I really like this device. Battery is swapped really fast and the fit and finish of the box is nice.

 

[amdnikos]

Wow 10? Personal use only?
Did you got official batteries as spare, or just lipo cells?

 

[Lorenzo Morchio]

I got my shipment in with 10 DX200 and 10 extra batteries today. I must say after some issues that were resolved through upgrading the firmware and charging the lipo I really like this device. Battery is swapped really fast and the fit and finish of the box is nice.

Where did you buy your extra batteries?

 

[dwcraig1]

I'm running case analyzer now, will post results later on. (much later, 4 - 5 hour process)