Tired of laying my mods down to charge, so...

Status
Not open for further replies.

debb

ECF Guru
ECF Veteran
Verified Member
Aug 12, 2010
10,930
8,261
in the nj woods
the usb is on the bottom and I am tired of removing tank/atty and laying it down to charge...I bought an mp3/ipod charging dock from the dollar store (NOT the apple plug one) and a usb cord (total cost $2.00)..I took it apart and installed the new plug (u have to use a tool to enlarge the hole..I used needle nosed pliers, but keep it a tight fit so it doesn't move)...measure your device height wise with cord so it will stand freely...snap it back together and plug into pc or get a wall wart for usb...I have a charge table set up so I made a couple and plug into a power strip...you can get the dock and cords in the same color for those that like to color coordinate...like me..lol...Works for istick 20/30w, mvp 20/30w, istick 40 TC, Sig 40w TC, and some others..like my smowell flavor tester...just make sure you position the cord the right way (rear or front facing ) before assembling ...you could probably modify for any bottom rechargeable device...just thought I'd share.....
 

debb

ECF Guru
ECF Veteran
Verified Member
Aug 12, 2010
10,930
8,261
in the nj woods
sure..best I could get right now...kinda cooking and cleaning..lol
DSC03748 (2).jpg
DSC03750 (2).jpg
DSC03751 (2).jpg
DSC03732 (2).jpg
DSC03734 (2).jpg
DSC03744 (2).jpg
DSC03745 (2).jpg
 

debb

ECF Guru
ECF Veteran
Verified Member
Aug 12, 2010
10,930
8,261
in the nj woods
Status
Not open for further replies.

Users who are viewing this thread