Good day all, I am experimenting with a new setup... I recently purchased some FC-2000 porous ceramic wick for my Genesis atomizer and TI wire. Has anyone ever tried this? I would like to talk about setups and things I should try. I am having a hard time getting this to produce good consistent clouds and in my head this should work amazingly.
Currently I have a Steamboy v2.1 with .4MM Pure TI wire on a Joytech Evic VT. Let me know your thoughts. Any input is appreciated.
I have a .23ohm coil set at 450 degrees F and 30w. I have only had it setup for 15hrs which may be my problem. I did not cheese cloth wrap the wick. It seems to be wicking fine but the TI wire doesnt seem to get hot enough. There is not much better results if I turn the temp up, and after a few pulls above 500F it gets a little icky tasting.
Thanks!
Currently I have a Steamboy v2.1 with .4MM Pure TI wire on a Joytech Evic VT. Let me know your thoughts. Any input is appreciated.
I have a .23ohm coil set at 450 degrees F and 30w. I have only had it setup for 15hrs which may be my problem. I did not cheese cloth wrap the wick. It seems to be wicking fine but the TI wire doesnt seem to get hot enough. There is not much better results if I turn the temp up, and after a few pulls above 500F it gets a little icky tasting.
Thanks!