The Overlooked Tootle Puffer Gear Thread

[O.C.D.MakesMeDoIt]

That Prometey screws together, right? Got a link?

Yup, it sure does screw together (and can completely disassemble it also, easily). So if you're worried it's like a Heron that is only held together by o-rings, that's not the case with the Prom.

Not sure if you mean my clone's link or the original modder? So here's both...
Original: Atomizer «PROMETEY»
My Yeahsmo clone's vendor on Bonanza.com: http://www.bonanza.com/listings/Prometey-V2-Titanium-Mods-Atomizer-RBA-RDA-Dual-Mod-CLONE/292089963. He seems to use individual item listings instead of one listing offering multiple quantities. So you may need to search vapor2flavor's Bonanza booth for Prometey in case the one in that link has already been sold. Borislav (the vendor's name) also answers questions pretty darn quickly, and ships real fast too. Both my Proms arrived in just a few days from FL to AZ.

If you want, I'd be happy to strip one of my Yeahsmo Prometeys down completely for you, and provide pics. (ooh, more Prometey Porn? )

FYI, I think I mentioned in my original post about this clone that the ONLY issue was a little left over metal shaving over deck air hole on one, and "below deck" airholes on "stem" on the other. Both easily shaved off with a metal nail file, no dremel or anything else required.

 

[O.C.D.MakesMeDoIt]

That just made me bust a gut!

Knowing I busted someone's gut always makes my day

(love your name - soooooo apropos in my world!)

Thanks @DingerCPA . My parents had a very odd sense of humor when they named me. Oh wait, no they didn't. Which is likely in part why I have that issue and use that name

 

[O.C.D.MakesMeDoIt]

I had a truck smash into my car today while driving with my family in it, pushed the car over 2 lanes of traffic, missed everything and came to a stop on a grass embankment. Not a single mark on any of us, someone was looking over us today because it could of been a very different story.
It makes you truly thankful towards life. I need a vape, like the whole bottle.

Someone or something surely on your side today watching over you and your family!

Just don't forget to continue being thankful for that life thang! (too easy to forget within days, as adrenaline wears off and everyday life takes over again. I speak from experience, a whole lot of it. And I often forget to heed my own advice)

 

[Kenna]

Yup, it sure does screw together (and can completely disassemble it also, easily). So if you're worried it's like a Heron that is only held together by o-rings, that's not the case with the Prom.

Not sure if you mean my clone's link or the original modder? So here's both...
Original: Atomizer «PROMETEY»
My Yeahsmo clone's vendor on Bonanza.com: http://www.bonanza.com/listings/Prometey-V2-Titanium-Mods-Atomizer-RBA-RDA-Dual-Mod-CLONE/292089963. He seems to use individual item listings instead of one listing offering multiple quantities. So you may need to search vapor2flavor's Bonanza booth for Prometey in case the one in that link has already been sold. Borislav (the vendor's name) also answers questions pretty darn quickly, and ships real fast too. Both my Proms arrived in just a few days from FL to AZ.

If you want, I'd be happy to strip one of my Yeahsmo Prometeys down completely for you, and provide pics. (ooh, more Prometey Porn? )

FYI, I think I mentioned in my original post about this clone that the ONLY issue was a little left over metal shaving over deck air hole on one, and "below deck" airholes on "stem" on the other. Both easily shaved off with a metal nail file, no dremel or anything else required.

Thanks, I bookmarked it. I have transmission seals to try to get done this month or next.

 

[DavidOck]

I had a truck smash into my car today while driving with my family in it, pushed the car over 2 lanes of traffic, missed everything and came to a stop on a grass embankment. Not a single mark on any of us, someone was looking over us today because it could of been a very different story.
It makes you truly thankful towards life. I need a vape, like the whole bottle.

Good that you're all unharmed!

Hope your blood pressure comes down below 300 soon.

 

[MikeyConti]

@ccwaters I have also been looking at those ZNA Clones. So they function pretty good around 7W for Tootle Puffing?
If so will deff. grab one for the stash when I get paid!

 

[rhelton]

@ccwaters I have also been looking at those ZNA Clones. So they function pretty good around 7W for Tootle Puffing?
If so will deff. grab one for the stash when I get paid!

They dont have step down. If your ohm load on your atomizer is 1.20 and up you will be ok. They cannot deliver less than battery voltage. This is not a huge problem as the Evolv DNA boards did not have step down until last year with the DNA40. I would say get one you will enjoy it.

 

[ccwaters]

They dont have step down. If your ohm load on your atomizer is 1.20 and up you will be ok. They cannot deliver less than battery voltage. This is not a huge problem as the Evolv DNA boards did not have step down until last year with the DNA40. I would say get one you will enjoy it.

Yes, your correct, Didn't realize the atomizer I was using was @1.1 ohms so it was close to what I expected @7 watts. Apologies for the misinformation!

But the silver one now does it thanks to the one working DNA40 I just got from Evolv. A little annoyed though, Of the two DNA40 boards I was sent for RMA replacements one is DOA, guess the black one will have to wait.

 

[aldenf]

Yes, your correct, Didn't realize the atomizer I was using was @1.1 ohms so it was close to what I expected @7 watts. Apologies for the misinformation!

But the silver one now does it thanks to the one working DNA40 I just got from Evolv. A little annoyed though, Of the two DNA40 boards I was sent for RMA replacements one is DOA, guess the black one will have to wait.

Will Evolv ever live down the DNA 40 fiasco?

 

[rhelton]

Will Evolv ever live down the DNA 40 fiasco?

I have 3 that function just fine. 1 from Hana Modz and two that I transplanted into clone devices. The Hana is a large screen and I have 4 total of the small screens, got them from Sweet Vapes for 35 dollars. I have one installed in the Xvo Stick you see as my avatar and the other in a clone Hana V4S. The other two I am not sure just yet but will figure it out. I just love em and glad that I have them. I guess ive gotten lucky not sure.

 

[roxynoodle]

Will Evolv ever live down the DNA 40 fiasco?

No, lol!

Ok, rhelton has gotten lucky and they've made me miserable.

Evolv is based in Ohio. I want to support them, but I just can't.

 

[rhelton]

Yes, your correct, Didn't realize the atomizer I was using was @1.1 ohms so it was close to what I expected @7 watts. Apologies for the misinformation!

But the silver one now does it thanks to the one working DNA40 I just got from Evolv. A little annoyed though, Of the two DNA40 boards I was sent for RMA replacements one is DOA, guess the black one will have to wait.

I did not even see your post I was just trying help MikeyConti with his decision on buying one. They are nice devices, I do not really care for the 18650 tube sticking out past the body but I am getting used to it on mine.

 

[rhelton]

No, lol!

Ok, rhelton has gotten lucky and they've made me miserable.

Evolv is based in Ohio. I want to support them, but I just can't.

Probably just luck I am sure

There were a bunch of people over in the XvoStick clone thread here that got boards from Sweet Vapes and nobody ever had a issue with them that I know of. I wonder why they have so many issues dont they test them before going out?

 

[Kenna]

Probably just luck I am sure

There were a bunch of people over in the XvoStick clone thread here that got boards from Sweet Vapes and nobody ever had a issue with them that I know of. I wonder why they have so many issues dont they test them before going out?

I have no problems with my Hana's either. What was the problem?

 

[rhelton]

No, lol!

Ok, rhelton has gotten lucky and they've made me miserable.

Evolv is based in Ohio. I want to support them, but I just can't.

Probably just luck I am sure

There were a bunch of people over in the XvoStick clone thread here that got boards from Sweet Vapes and nobody ever had a issue with them that I know of. I wonder why they have so many issues dont they test them before going out

I have no problems with my Hana's either. What was the problem?

There have been allot of problems with the dna40's. All of mine are work great and I really like em.

 

[DancingHeretik]

They dont have step down. If your ohm load on your atomizer is 1.20 and up you will be ok. They cannot deliver less than battery voltage.

What a shame!

 

[rhelton]

What a shame!

The authentics do not have it either so you would not be missing out on anything.

 

[MikeyConti]

The authentics do not have it either so you would not be missing out on anything.

Thats very good to know, as I did not before!
Thanks for answering questions!

 

[DancingHeretik]

The authentics do not have it either so you would not be missing out on anything.

But, it's pretty!

 

[roxynoodle]

I forgot about the DNA30 and clone ones not having step down. Yes, if you aren't vaping at 4.2v or higher, its not a good mod for you. If you do, then its a nice size and very heavy duty. And yes, the Amod ones have 20 x 1 threading so you can hybridize the Heron and Aqua v2 to it

Many DNA40s with scrambled screens or no screen or DOA. Look at the authentic Xvostick thread, and those are more recent mods.