It fell out of the car onto asphalt and broke. I didn't see clear tanks in stock only the colored option I will look again
Sent from my SM-G900V using Tapatalk
It fell out of the car onto asphalt and broke. I didn't see clear tanks in stock only the colored option I will look again
I didn't see clear tanks in stock only the colored option I will look again
You're fine with the arrow...just don't quit our day job and become an arrow drawer full timeclick here (sorry, i am not good with drawing arrows )
It's 2.5mm x 1.5m. Yes, the Calix o ring set has all the orings includedHi Billie, I need an oring for the v2 the one nearest to the 510 connection could you tell me what the size is please I will buy a few. also on the site the oring set is that all the orings needed for the atty? cheers Ben
Thanks billie i'll get some orderedIt's 2.5mm x 1.5m. Yes, the Calix o ring set has all the orings included
...and a chimney!Billie? Is it possible to buy a New Top Cap for a Calix?
Billie? Is it possible to buy a New Top Cap for a Calix?
Of course. Please send an email with what you need and an order reference number at byleogr@gmail.com and we will let you know of the details...and a chimney!
It does. Here you go : Calix V2 P3 Color edition - By LeoHey Billie!
Just a quick question:
I was wondering why the Calix V2 P3 doesn't come with a mouthpiece/drip tip?
We didn't receive this message. "Fortunately", it is the first time I hear of something like that and we have shipped a lot of units. The oring doesn't have the resistance to unthread the pin from the cup normaly. Did you try to change the insulators? Also, are you using the brass separator to tighten it up?Hi Billie,
Sorry to be a Pain, could you see whether my email to By Leo has arrived? In case it hasn't, I'll cut and paste it on here too. I'm having problems with the second V2 Base that I purchased.
Hello Guys and Girls.
I have a slight problem with one of the 2 Calix V2 Bases that I recently purchased from you.
The Pin seems to stick in the base. When I undo the Cup to gain access to the Screws to build a Coil,or replace a Coil, the Cup unscrews from the Pin, which in turn means that the cup is no longer held rigidly and moves all too easily. I have completely stripped the Cup and the Pin down, cleaned everything and reassembled, making sure that the Pin is screwed into the base of the Cup as tightly as I dare. I lube the 2 O Rings on the Pin with liquid before reassembling and that seems fine, but when I need to raise the cup the next time, the same thing happens again, by which I mean, the Cup rises, but the Pin remains within the Base. Obviously I can keep rebuilding it, but I am wondering whether there is a conductivity issue as this particular Calix does not perform as well as my others. These are V1 Calix on V2 Bases. One of my friends is also having a similar problem with his, so I told him that I would contact you and ask for some assistance.
I am a bit concerned because I have recommended the Calix V2 to many people here in the UK and I am hoping that they won’t run into this problem as well. I am thinking it has to be an O Ring problem? But I do keep them lubricated with e-liquid.
I do hope you can suggest something to sort this out as in my opinion, the Calix is by far the best RTA currently on the market.
Many thanks
Rob
ORDER TOBOZLHJC - SHIPPED
I hope someone can suggest something as the performance of this Calix is fast disappearing.
Testing the nano
We didn't receive this message. "Fortunately", it is the first time I hear of something like that and we have shipped a lot of units. The oring doesn't have the resistance to unthread the pin from the cup normaly. Did you try to change the insulators? Also, are you using the brass separator to tighten it up?
We got the email and answered. We got the complain as well. It just came with a delay as it seems. I will send you a new, tested v2 SS Cup with its pin, just to be sure and you can send back the one you have, when you receive it, so we can have a look and see what is wrong ( so we can guide others, if we come across this problem again )I sent the email to the contact address on the site Billie. The same one that I sent the email about the O Rings last week.
Seems that either my mail program isn't sending to you, or the address is incorrect.
I'll send another Test Mail now.