I've ran Max VG in the cthulhu v2 without issue and the channels in this are even bigger so I would say yes! Definitive answer from me in about 10 hours or so when I get my hands on mine
I've ran Max VG in the cthulhu v2 without issue and the channels in this are even bigger so I would say yes! Definitive answer from me in about 10 hours or so when I get my hands on mine
I think the concern with the griffin is the spacing between the chimney and the ID of the glass, its a very tight fit, might not let 100VG feed down to the wicks fast enough.
I don't have one, but that would be my concern with the tank.
I think the concern with the griffin is the spacing between the chimney and the ID of the glass, its a very tight fit, might not let 100VG feed down to the wicks fast enough.
I don't have one, but that would be my concern with the tank.
Can confirm it's wicking a treat with Max VG at 65w dual 24g kanthal 9 wraps 3mm ID. Could push it further, maybe a bit too much wick in there but it was a quick and dirty build!
It shouldn't be a problem, especially after the first couple of draws and the tank warms up. That first draw on a cold tank might be a little slow, but once that VG warms up it flows easy.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.