That is one of the best tips I've seen here! I'll pick up a post cap today. Or, think of all the different types of wood you could choose for this.So I needed something to hold several rda's and tanks. I found a post cap at Lowe's that cost about $3. I flipped it over, View attachment 535641 View attachment 535642 took a 3/4 paddle bit that I have and drilled out some holes. It works great!
Sent from my HTC One M9 using Tapatalk
That's exactly what I've been wanting to do. Do you remember what size drill bit you used for the 510 pin to fit in? Yours looks amazing, any other tips that could help would be really appreciated. ThanksI made this one out of a 2x4 and a 2x8. Sanded it and stained and glossed it. The front row of each level are the Atties with the juice bottle sitting just behind. The lower level has holes for 30ml juice bottle and 7 atties, the upper level is for 10/15 ml bottles and nine atties. I also stapled a cloth on the bottom so it sits without damaging the surface. I think each piece of wood is 14" long. Two wood screws of 2.5" keep them together.
View attachment 540151
That's exactly what I've been wanting to do. Do you remember what size drill bit you used for the 510 pin to fit in? Yours looks amazing, any other tips that could help would be really appreciated. Thanks
Wow that's awesome, I'll be stopping at home depot on my way home. Thank you very much! I'm excited to finally stop using old spools of wire for atty stands lolView attachment 545346
Sorry to be slow. Three drill bits. 1&1/8" for 10ml bottle and RTA/RDA, 1.25" for the 30ml bottles. The drill bits are the spade type. The point makes the hole for the 510. If you drill to deep on the lower level and the point pops through oops, don't worry. I attached an old piece of sweatshirt to the bottom so that it did not scratch the desk. Here is a pic:
Compared to what you all use, mine is a bit embarrassing, but it might be a useful idea for others.
Compared to what you all use, mine is a bit embarrassing, but it might be a useful idea for others.
You have inspired me to rethink my designs!I made this one out of a 2x4 and a 2x8. Sanded it and stained and glossed it. The front row of each level are the Atties with the juice bottle sitting just behind. The lower level has holes for 30ml juice bottle and 7 atties, the upper level is for 10/15 ml bottles and nine atties. I also stapled a cloth on the bottom so it sits without damaging the surface. I think each piece of wood is 14" long. Two wood screws of 2.5" keep them together.
View attachment 540151