I can't answer because the poll doesn't allow multiple selections and I vape between 10 Watts and over 100 Watts depending on which setup I am using at the time.
Seeing all these replies I feel like I should be moving on to a regulated mod soon, the vapes really do feel different going from a full battery to an empty one
Lately on my rda I use Temp control limited to 400 F with 16 watts max but with a 24 watt pre heat that goes 0.4 seconds. I've gone back to using my old Nautilus mini occaisionally. For that I use the same 16 watts and 150% preheat but without temp control. Temp control is unnecessary with the N mini because the coil is always saturated. The rda uses 30 AWG stainless wire that starts at 1.4 ohm and rises to about 1.7 ohm. I believe the N mini kanthal coil is also 30 AWG and about 2 ohm fixed resistance.
Trusty Cisco Spec 1.5 Ω atties on a Spinner at 3.2 V, or on a ProVari at 3.0 V -- and sometimes 2.9 V, just because I can... and still get (a LOT of) satisfaction.
Juice: 36 mg/mL WTA Unflavored AeJ
Consumption: 1.5 mL a day (plus another 1.5 mL in a paper towel!)
Of course this is not 100%. I vape many differernt ways for various reasons, but for my natural way, the above is how I get down!
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.