◙ Li’l PINCH (←thang) ◙ pdib (←maker) ◙ not sayin’ (←just sayin’) ◙ shuh-ZAM! (←hyperbole)
- Thread starter pdib
- Start date
- th_trl_thread_readers 0
- Status
Man you're worse than Tamiyou may well,
but I'm guessing your wife not so much
Mulciber peeps.
Capture screws same size as Nuppin screws?
I thought I saw something suggesting 0.9mm?
Sent from my SM-G930P using Tapatalk
Capture screws same size as Nuppin screws?
I thought I saw something suggesting 0.9mm?
Sent from my SM-G930P using Tapatalk
I believe so
I run mine with both slots open and use a drip tip that goes outside the drip tip post so I can utilize the full 6.5mm thru bore and that setup is pretty airy. I run a single SS316L coil 7 wraps, 3mm ID, .035 ohms and position the coil so the bottom air slot is underneath the coil. I don't position my coil directly under the drip tip hole but a tad closer to the slots. Looking straight down I see about 2/3 of the coil thru the drip tip hole. For me that airflow dynamic is what feels similar to me when comparing the airflow/flavor to the Nuppin. I also run that exact spec'd coil in all my Nuppins so that's what surprised me when I first tried the Mulciber. I think your gonna like the Mulciber more once you turn a drip tip for it that goes around the Muicibers drip tip post.
Thanks Marcus. I intend to turn two tips, one from delrin and the other from Ultem like yours on the outside. I fully agree that you need to use all of the 6.5mm diameter of the fixed tip for flavor and airflow.
As I said I'll have them in a couple days so I'll let you know how it goes
Gigapunch on the way to our island cabin.
Sent from my iPhone using Tapatalk
Speaking of tips...
I lost my favorite one.
Couple weeks ago I got fuel and had to take my trash out.
Must have leaned too close to the can.
I dug through the can until I struck discarded urine.
Damn disgusting truck drivers!
I'd beg and beg for a new one...
Already considered making a sign; "will work for wide bore". [emoji14]
But I fear the friction fit isn't nearly tight enough for the abuse it'll take every day.
I need something applied with a mallet.
Seriously, I considered getting a shop to turn me a bunch of copies.
Like... a lot.
Sent from my SM-G930P using Tapatalk
I lost my favorite one.
Couple weeks ago I got fuel and had to take my trash out.
Must have leaned too close to the can.
I dug through the can until I struck discarded urine.
Damn disgusting truck drivers!
I'd beg and beg for a new one...
Already considered making a sign; "will work for wide bore". [emoji14]
But I fear the friction fit isn't nearly tight enough for the abuse it'll take every day.
I need something applied with a mallet.
Seriously, I considered getting a shop to turn me a bunch of copies.
Like... a lot.
Sent from my SM-G930P using Tapatalk
It's airier than the Nuppin is (for me). There are two afc rings. I'm using the two slot one and I have it closed up a little bit which is just about perfect for me [emoji3]
Master of Bassetts
Silver and black both out of stock here, but you could bookmark...
Saw them somewhere else, but can't recall...
And these are KINDA black, and different, and popping up now, but I haven't seen a place to order them - just a "group buy " reference, and I think they were in the $15 range.
Happen to have one of these to sample on the way. Will report back.
As far as I know, they are not quite released in mass as of yet.
Thanks Train, I'll keep an eye on thoseSilver and black both out of stock here, but you could bookmark...
Saw them somewhere else, but can't recall...
And these are KINDA black, and different, and popping up now, but I haven't seen a place to order them - just a "group buy " reference, and I think they were in the $15 range.
Looks great!
Not exactly for me, though.
As far as available for purchase, cherry vapes makes the closest to what I'm looking for, I think.
BUT! They're gawd awful ugly and a little on the proud side.
And ribbed... for her pleasure? IDK... SMH...
AFAIK only 1 person makes what I'm looking for.
And it's not for sale.
Hence why I took so long to say something.
I'm not looking to get a replacement.
Though if I found one for sale, it would be mine. Oh yes, it would be mine.
But I just wanted to share my story... since it had all the makings of a good story... departed love ones... the search to be reunited... and urine... a sea of stale urine.
Gratuitous photo...
Sent from my SM-G930P using Tapatalk
- Status
Similar threads
- Locked
