Search results

Depending on how the board is mounted you could get a B enclosure and cut the holes for your display, buttons and 510 and put an 18650 sled in it. I build custom mods but I buy the NLPWM board and I buy the enclosure with the holes already cut for the display, actuators, fire button and 510...

I build custom lipo mods myself and I had 1 in rotation along with a MaxAmps 2800mAh 4s. A cell went bad in the pack so I bought another one. It’s a good pack. It last me 2 days vaping at 275W-350W. Sent from my iPhone using Tapatalk

I just bought this one. I make custom lipo mods so I don’t need a Purge let alone another mech. I have probably 8 lipo mods and just got the mech going back to the early days of my vaping hobby. Sent from my iPhone using Tapatalk

Yeah that will work lol Sent from my iPhone using Tapatalk

The problem with that is my hybrid mech doesn’t have the space to put a magnet. It would have to be almost paper thin. I’ve debated on using aluminum foil to be a a contact point between the 2 cells but I don’t think that would be too safe. Sent from my iPhone using Tapatalk

It’s not the 510 pin. It’s the positive on the cell not touching the negative of the cell it’s stacked on. Sent from my iPhone using Tapatalk

Well I got the new wraps and that didn’t work. Still don’t have enough showing on the positive to make a connection. Sent from my iPhone using Tapatalk

Yeah i know to get those when getting wraps. I used to wrap all my 18650’s when they needed it so I have a handful of those but would need to get them for these cells. Sent from my iPhone using Tapatalk

I thought bout getting a couple wraps and doing just that. I guess I’m gonna have to give it a try. Sent from my iPhone using Tapatalk

You must know ohms law and know how to build within the batteries amp limit unless you want to be the next guy on the 6:00 news with his hand and 1/2 his face blown off. Mechs are no joke n nothing to play around with cause if you haven’t done your research and know how to build to your battery...

A box mod and mech is 2 totally different devices. Mech mods have no wires but all contact points which makes the device work where an unregulated box has wires and a mosfet or 2 to funnel voltage through in order not to get your fire switch. With either of these you need to research how to...

So I found it and it did have the disk in it still so I put it in the mod with the 26650’s and it worked but the only problem is the parts of the mod wouldn’t fit tight together to the sleeves ended up shifting so not sure what I’m going to do. Guess I’m gonna end up having to break down and buy...

I was wondering how I used my stacked 18750 mod back when I had it. I remember I had one of these and didn’t even think about it until I saw them. I appreciate it. I think I still have my old mod. I’m gonna go look for it and if I find it see if I still have that disk. Sent from my iPhone...

Def let me know. I don’t want to just set these cells to the side and never use them. Sent from my iPhone using Tapatalk

Yeah I don’t want to do any of those “quick temporary fixes” that may end in me being on the 6:00 news for the dumba*# award. I don’t use round cells anymore. I build lipo mods and run lipos all the time now. Been wanting one of these for a while and finally pulled the trigger. Here is one of my...

So the mod came in the mail today. I like it but I have an issue. It’s been a while since I ran a mech. I’ve only ran 18650’s but everybody was saying get the IJoy 26650’s. I did, wanting to stack the batteries and noticed that the tops were super flat. Not like the 18650’s I’ve used in the...

I’ve watched a lot of his videos when I first got into building mods. Never did see him build a wooden mod. Here is what I get when I click on the link. I even opened it up in safari and it came back the same thing. What would I look up in YouTube to find it? Sent from my iPhone using Tapatalk

I clicked on the link to check it out and it came back as video not found. Sent from my iPhone using Tapatalk

So I ordered the Big Mac mod this evening. They are based out of Canada. After emailing the owner over the past week or two and figuring up what shipping would be I pulled the trigger. Only $55 and change in USD. I’ll let y’all know what I think when I get it. It’s a small world. I’m in...

I agree with Ben85. Get the right tool for the job. Sent from my iPhone using Tapatalk