Search results

You still have this? If so, I'll take it. Sent from my SM-T813 using Tapatalk

Of all the reaponses, this is the one that actually answers your question. Use the higher amp charger, your mod will only pull what it needs.

Where were you this weekend? Just ordered one myself, but damm... I kinda want yours too. Let me mull it over, may pm you and take it after work. PM sent, decided.

Push the tube further up onto the pin, I had this too. It can be tough with the bottle attached, so I unscrew it, leaving the top through the tube, than attach the bottle once the tube is secure. You'll learn the perfect amount to leave sticking out of the bottle quickly, my bottle gently rests...

The only problem doing this is getting the thread pitch (spacing between threads) 100%. If it is off slightly, you will have major issues screwing/unscrewing, especially with a harder material such as steel. If people are interested in trying something like this, I could probably do a 3D scan of...

I used the spare screws from my Velocity mini clone (which I also use on the Therion) and they are a perfect fit in the Delerium. I prefer the Velocity, and see a v2 clone in my near future, unless I find a similar 23mm tank I'd rather use. But with the top air slots closed, the flavor on the...

The first one, it certainly looks like plastic, but for the price I can forgive it.

I have a black and wooden already, just ordered a silver and red to complete the set. I guess you can say I like this mod.

I fried an old phone screen with a salvaged hard drive magnet, it was quite amusing, in a sad way.

Now, that looks like a nice implementation of the DNA75, I'm not a fan of 26650s after Moochs testing.

22 gauge is thicker than 26 gauge.

That would be 22 wraps on a 3mm bit, I don't think you meant for that. Use Steam Engine to calculate. Even if you meant 1ohm per coil, and 0.5 net resistance, that's 11 wraps. And it'll take a lot of power and time to fire it up.

Yeah, I certainly wouldn't push those cells past 150 watts max, that doesn't even leave much headroom. And "authentic Imrens" is oxymoronic, they are authentically re-wrapped by Imren as they do not actually manufacture the batteries (to the best of my knowledge).

My four green 25rs, and the two I gave a friend, are about 6 months old. Used in single cell mechs, at around 0.3ohm, regularly. And they are still holding nice charges. Haven't actually noticed any signs of aging. Although, having so many devices, they get charged every two-three days, so they...

I, as well, was a long time cartotank user. I also preferred the 35mm 2ohm flanged smok carts. I moved to RTAs (Lemo Drop, than Lemo 2, URBA, etc.) and left the cartos behind (I gave my last like 80 to a user here). I now only use my tanks for out and about, and drippers at home, though I always...

I gave mine a full teardown and reassembling, and ensured I tightly screwed the tank and deck before securing the center pin/nut. Mine has been steady since.

I work in a dental lab and can tell you (we use titanium screws for implants) titanium screws are expensive, and as it is softer than steel, easier to strip. The screws are probably close to the same size used in most rdas, just longer and hex, our cost per screw is about $5. They are intended...

I have HG2s in my RX200, running it at 80w (it is one of many devices I rotate throughout the day) and eat up about 5mls a day with it. I get several days before I get to below 3.6v and start feeling the need to pull and charge them.

60 watts on any single 18650 regulated mod is getting close to the max CDR of any cell. Your 25r is a solid 20amp cell, 60 watts will pull a max 19amps from your battery, that AWT might have an even lower CDR (not 100% sure, but at most it will be 20amps as well). I would expect cells being...

Just out of curiosity, how high did you run it with those batteries? I only ask because @Mooch rated them between 15-20amps cdr (overly high temps at 20amp to give a true 20amp rating), which means they cannot safely supply more than around 150watts continuous, down to the low voltage cutoff...