Search results

I can recommend you some easy for build and wick RTA's. 1st Kayfun v3 mini 2th Byka 6 3th Doggystyle RTA They are flavorful, no leaking /except of your mistake with cotton, wicking way or bad o-ring's/ and easy to use atty ...only Doggy is with bottom filling. I'm use those 3 for everyday vape...

+1 for Doggy!

Also try Doggy style RTA! ;)

With mentioned juices you'll have no problems with the tank. AFC is working well on Doggy and can have a good thigh draw. Also can buy a replacement tanks from GB, there is 5 numbers in pack .

Also you can see Hurricane and Doggy style RTA in same store ;)

Take a look at ByKa 6 on gearbest! It's my favorite MTL atty and I'm sure that you will be satisfied with it. That's a good clone with easy setup without leaking /except from bad o-ring or inappropriate wicking IMO/. Good luck mate!

Every atty leak just because of bad setup or bad o-rings imo. This one is not exemption but...I haven't any problem with it. Tight draw....o yeah. Don't have a pin...you can see on picture AFC ring with 5 holes and that's it.

Just write "K6 3ml" in GB [emoji6]

I will share info about the Merlin from my friends opinions. They use this atty equal with Byka 6. Maybe some of them prefer it just for wide range of vape....MTL and DL but little restricted. Hope it will help you.

Yes, I'm talking exactly for this. Don't worry about this 3ml label....it's a 5ml indeed ;) flavorful, easy to set. Will need replacement tank also from GB....just in case.

My suggestion is Byka 6 from GB! I don't know how will order it because of regulations but .... it's my favorite RTA for ALL DAY VAPE! Good luck mate!

My suggestion is Byka 6! Just try it and will forget about the other! ;) (beer)

I run my Doggy with micro coil, 2.5mm dial, 7 wraps KA1 around 1 ohm wicked with Muji cotton and put all the cotton through the channels, spilt the ends on opposite sides and tucked it around the deck. Vaping this set at 13 watts and receive a lot of good vape and rich flavor.

I could explain your dilemma like that.... You want to try to use an old-fashioned car /because of nostalgic sense/ instead of to ride a new one! :-) 1 vote for Go-player post [emoji106]

I can suggest only MTL atty and they are. ..kayfun v3 mini and ByKa 6, but you know that everyone of us has different taste for flavours.

For beginning it's good to use an coil calculator...like Steam engine for example. Just follow steps there and fill in the empty blank with your info.

If you are using TC should know more for Ohm law. ;) I used my K3 mini with SS 28AWG around 0.8ohm coil, 2.5mm dial loop, 18.5W working power and 25W preheat for 1sec. without any problems. Heard that with low ohms your K3 will become too hot. Also you can use SS in power mode with no problem. U...

Everything looks good. Just one suggestion...try on 2.5mm dial and thinner SS for your preferred ohm's, it will be a good deal for more cotton and good flavor. Cheers!

Thank you Danny! Will try and share the result. :beer From now I'm curious what will be. Изпратено от моят CHM-U01 с помощта на Tapatalk

I read your post's and assuming lot of signals that something is wrong with my nico. No label with date of expired. Color is yellow tinted /like color of Shade flavor after 2 months steeping/. Because of color of bottles /dark blue/ I didn't saw this. Now what....I have two bottles of bad...