dual coil

Product introduction The Steam Crave Glaz RTA V2, with 31mm diameter and 7.0ml large juice capacity. is a cool and fashionable rebuild-able tank atomizer. With a bubble glass tube, the juice capacity can be expanded to 10ml. The Glaz RTA V2 feature the innovative post-less deck and sliding top...

Product introduction The KAEES Solomon V3 RTA, utilizing the special post-less build deck and two interchangeable internal airflow caps (one for single coil building and the other dual coils building), is an outstanding cloud chasing tank with a variety of airflow options. Moreover, the unique...

Product introduction The Advken Manta RTA Resin Version is here to attract you at first sight. With 4.5ml juice capacity and 24mm diameter, the Manta RTA is flavor-chasing with resin tube and drip tip. It also features the tri-hole bottom airflow system and top filling design for an optimal...

Hi All ^^ i'm DL vaper. I know that. :) Could you suggest me an RTA with the following features? DL RTA Dual Coil / Single coil can also be used (like Zeus Dual) Bottom Airflow Get Cloud Performance. I'm using Zeus Single and Zeus Dual, but I got tired of the top airflow. I was thinking...

OK. Yes, I read through many, many threads in this folder and now I have a massive dizzying headache. Anyways, I have a GeekVape Zeus and it does not leak BUT I recently busted out my old StreamCrave Aromamizer and the flavor was so much better than the Zeus or any of the newer type wide...

I run it on an IPV5 at 40-50 watts with 26g coils at .61 resistance, I think 2.5mm in diameter. This was my favorite set up for weeks and now I burn the cotton and ruin my hits in just a day or two and I'm not seeing the variable, what changed? I really know nothing about building so I'm...

Got an OBS crius a while ago. Decent little tank but dual coil only. That's not a problem but I was wondering about a serial dual coil (two coils on same piece of wire) Should be fairly straight forward but I was wondering about the middle section of wire. I'm thinking it will be a bit of a...

Has anyone put dual coils on the single coil deck for the tfv4? I was thinking about trying it but wanted to see if anyone had an experience with it or if I would work at all. Will two wires fit in the hole and/or can I just put them under the screw head. Does it matter if the coil has one...

I'm looking to make 0.5 ohm dual coil with 30 gauge kanthal.. I looked online and others say they can achieve ~0.65 ohm with 30g wire, wondering if its possible to sub to 0.5 with it, or how many wraps? thanks

Some stellar RTA's have hit the market lately. These tanks can handle high wattage, high vg juice, have a variety of innovative features like juice flow control, top fill, big air flow, velocity style decks, and are coming damn close to producing rda quality vapor. Tanks like the Cthulu...

so ive just recently started building my own drip coils (recently being past 4 months or so) and im starting to finally catch on and think ive found my style of build i prefer. i have recently been using sn aeolus rda with top airflow which i found i really enjoy. but ive switched to my...

So I'm brand new to the dripping scene, I have a question about dual coils, I know the resistance is halved, but what about the amps, do they double with the two coils or does it completely depend on the total resistance of both coils? In other words, if I run a .3 ohm single coil on my RDA...

I lost a screw in my rda but since my Lemo broke I've been using it again with only one coil but I wanted to know if there are any benefits to a dual coil for when I buy a new atty soon. What are your opinions?

Okay so I'm on my fourth box of these and they're just horrible. Not working very well at all. At first I thought I was doing something wrong or that maybe the problem was with my tank or battery. I've tried different juices & three different tanks & batteries with no improvement. With a new...

I recently bought a 30W mod (my first WW), and I also have this RBA that I bought a while ago that I haven't been able to use because every time I tried to rewick/recoil it I ended up making it .3 ohm or something around there, which obviously didn't work with my 3.3-4.8V VV battery. Since I now...

i just got an ipv3 and building on a mutation v2. I wrapped a dual coil with 22 ga about 6 wraps each which gives me .2 ohms. It was vaping fine last night, now this morning it seems like one cool isn't firing and the other is getting red hot. What's wrong? Any tips on building on the mutation...

Hi Guys, After smoking for 20 years and trying everything to quit, I decided to give Vaping a try, since I have a lot of friends that quit smoking that way. I'm on day 9, and have had almost no withdrawals. The first few mornings were the toughest, however after about 4 days I have changed my...

Title says it all pretty much. I was just wondering if I could remove one of the coils from my Smok VCT PRO so that a can run it on lower watts. I know you can rebuild the a1 but I haven't seen any videos on the PRO.

I am new to this forum but would like to share my experience with the kangertech subtank mini. Last week I wound/built a dual coil made from one single piece of kenthal 28 ga it worked pretty well, but it had waaay too much air resistance for my liking so I ripped it out and just wrapped a coil...

Disclaimer: I'm a rookie, I don't yet know half what I'd want to know before rebuilding a coil - I have lessons planned from a buddy, but it's gonna be awhile So, that said - can I just reWICK this thing?! Kanger Protank 3, yes it's dual coil and for that reason I can't find a YouTube...