I've found that Ni80 in general has a metallic taste more often then not. I've searched all over and read this same thought. Some recommend Kanthal.
Those of you who've tried Kanthal, in comparison to Ni80, share your thoughts and experience...if you will please.
hi all, I been vaping on and off since 2012, I fell back into cigarettes but am ready to vape and barely smoke at all ( i was down to about 1 cig a month).
Vaping got quite complicated over the years, and I like it simple. I always remember someone joking saying smoking is so easy, 1) put...
Pure Nickle Round Resistance Wire.
New 100 ft spools.
1 26 AWG
1 30 AWG
1 32 AWG
$20.00 for all 3, plus $5 shipping.
Includes 1 Beadalon band (google it) to keep the spool from unraveling.
Each bag contains 6 bundles of 1000 each (yup, 6000 total per bag)
1 bag of 1.8 OHM
1 bag of 2.2 OHM
Each bag is $20.00, plus $5. shipping
Buy both, for the same $5.
I also have the machine ! to make your own if interested .. it's new.
Three boxes of pre-made Stainless Steel 316L wires.
Each box contains 100 wires. $10.00 a box.
Should last you a long time :p
1 box is 26GA/0.6
1 box is 28GA/1.3
! box is 30GA/1.5
Shipping is $5.00 total, no matter how many boxes you buy.
Wondering which gives better flavor, kanthal or SS316. I’ve been using kanthal in my Profile 1.5’s. Really like the mesh RDA’s. Never tried temp control but might like too. Opinions are very welcomed.
This video is from a time when Rip Trippers was a more normal acting guy, and this coil build is an excellent and easy to follow tutorial. This coil works extremely well in both my older classic rdas, as well as newer single coil rtas. With this mail ban, what happens when you run out of your...
I have a Fireluke 3 tank, and I love it. But I've been wanting to play with temp control on my device (Vaperesso Revenger X). I have tried several times using the SS TCR for 904L stainless, tweaking the tcr up and down, tweaking the max wattage, but cannot get anything like a real TC flow...
Yo guys I bought a kanthal wire and the brand is called UD
It's kanthal wire and I haven't use it yet but when I took a closer look to it
It's kinda grey colour and have some metal smell to it if you rub with your hand like it removes some deposits...
I didn't use it yet after seeing this...
Hi, good news! Here comes one type of new vape coils that are compatible with M Pro and new M Pro 2 by Freemax - Freemax Kanthal M5 Mesh Coil 0.15ohm. Utilizing FM COILTECH4.0 with SS904L Mesh and Tea Fiber Cotton formula mixed with Original Kanthal Mesh Coil, the modified Kanthal M5 Mesh Coil...
My coils are turning pitch black in less than one day?
My mod is 1-30W and I'm using Kanthal A1 26ga at 0.6-0.9Ω mostly vape it between 12-18W have even tried 19-25W
I'm using the DigiFlavor Siren 22 GTA RTA on my Segelie Mini 18650 battery mod.
My wicking is between so tight it pulls the...
Hi, I'm looking to buy some dirt cheap 18 gauge kanthal in at least 10 meter (about 30 feet) continuous lengths lengths. I can only seem to find it in 5 meter lengths from here; $1.67 Authentic Focusecig Kanthal Heating Wire for RBA Atomizer - 18 AWG / 1mm dia. / 5m at FastTech - Free Shipping...
I never used anything but Kanthal and Nichrome wire to build my coils.
All things being 100% equal (wire gauge, coil type, coil diameter, ohms, etc) do SS coils require more power to run to get the same vapor as the exact same coil/resistance made from Kanthal or Nichrome wire?
Hello All,
This is my first post here. Relatively new to rebuilding and wanted to share a study I found last night. Apologies if this is not in the correct section.
So, like most people I'm sure, I came across that article about why not to dry burn your coils. Which, being new to rebuilding...
I use 316 SS, and I made sure to space it out in my RDA build. For Kanthal wire, there is no spacing and when I dry fire, the heat is even.
I feel I'm getting hot spots with temp control due to crackling noise and juice getting into my mouth. Also, to get any kind of satisfying vape requires...
Up until yesterday I used a 100 ft Kanthal that I bought like 4 or 5 years ago. In the past few months the taste I was getting a lot of times was outright HORRIBLE and I mean making you feel sick horrible. It tasted like inhaling the smoke from a chimney.
I opened my RBA multiple times just to...
I have a problem with my setup. I have a Vandy Vape Bonza RDA and a VooPoo Drag.
So, my build worked fine with thin Kanthal A1, 9 spins.
I bought some pre-made Juggernaut Kanthal A1 coils, 5 spins. It gives me 0.26 ohm, 4.1 volts and it doesn't give me much to inhale and it tends to spit a lot...
The Kanthal Microcoil in stock, made of kanthal A1 vaping wire, 100pcs per box.
can use them on your rebuildable tanks.
20GA/0.2ohm
22ga/0.4ohm
24GA/0.5ohm
26GA/0.6ohm
28GA/1.3ohm
30GA/1.5ohm
check the surprise price here:
100PCS Kanthal Microcoil 20GA 22GA 24GA 26GA 28GA 30GA
I am proud owner of berserker rda, I have one stock coil left and loads of 28 kanthal left over.
Anyone have a twisted 28 kanthal build they would like to share?
I started building when I got my Kayfun Prime (3 months back) and this is the only RTA I have and I've ever known :) so my experience below is only limited to Kayfun Prime tank.
For the last 3 months I only built Kanthal coils. My normal build: Kanthal 28GA, 2mm ID, 8 wraps, 1.4 ohms, Vape at...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.