microcoil

The Kanthal Microcoil in stock, made of kanthal A1 vaping wire, 100pcs per box. can use them on your rebuildable tanks. 20GA/0.2ohm 22ga/0.4ohm 24GA/0.5ohm 26GA/0.6ohm 28GA/1.3ohm 30GA/1.5ohm check the surprise price here: 100PCS Kanthal Microcoil 20GA 22GA 24GA 26GA 28GA 30GA

25x7 @2.7778 mm = 0.805Ω 22.9W (5.2A) 170 mW/mm²

So I'm new at micro coils. I've only built two for my kfl so far and they work great. After seeing some good reviews about the kraken I decided to get one. I must say this thing is gorgeous, but when I got done with my coil (8 wraps on a 1.8mm precision screwdriver with silica wick) and it all...

Ok so i watched some videos on the tube about micro coil set ups in the kayfun 3.1 so i decided to try it now i will tell you i didnt find anything i liked about it at all there were many cons about it and i will list them. 1. Uses more wire 2. Takes longer to heat up and get vapor from it 3...

I normally do not do this as I used to feel that it simulated flooding on certain decks. When doing a micro/macro coil that is NOT centered with the center post, I cut the side closest to the edge of the deck just short enough to tuck back toward the negative post and then leave enough on the...

Alright.. So I wouldn't say I'm completely blind on how to rebuild coils for RBA's (if I'm even using that term right). I currently have a Patriot, IGO-W5 and a Nimbus clone that I hardly use. Could anybody direct me to any thread(s) that could help shape my vocabulary and know how? I...

Here is a step by step way to create a very cheap and useful coil wrapping tool. Materials required: -Large paperclip -Drill bit (5/64 is pictured) -Pliers (optional) -Wire size of your choice Thread wire through top loop and wrap around side post next to it to secure wire. Perfect for...

Thought I'd share something I've been playing around with. One of the things that's annoyed me about nano/micro coil cotton clouds is that using too much cotton wastes juice, and using a small amount of cotton means always feeling like I have to tinker with it's placement. I've also wanted to...

I've been happy with two 3/4 wraps of 28 gauge in an rda since I first started building in one. Yesterday I was bored and decided to try and make that type of coil EVERYBODY has been talking about or has heard of, the microcoil. I wrapped 28 gauge around a bolt until the coil looked long...

Here you go. I love Kidney Puncher. I love Wizard Labs. Here is the thread for making microcoils. This set up gives good flavor, good vapor, and it vapes good. I change my wick about every 3 days or so, or whenever I have nothing to do since re-wicking is fast and easy.