nemesis clone

Hey so I have a nemesis clone that I got not that long ago and I'm loving it. The only issue I currently have with it, other than that it's a spring loaded firing switch, is the little tiny pin inside the switch keeps falling out forcing me to have to break my switch down and put it back...

Super noob question here. I just got my nemesis clone today. I have an18650 battery charging and it's a flat top. I don't want to screw this up and was wondering which way to put the battery in? Should the positive side be up at the top by the tank and the negative side be at the bottom of the...

I have nemesis clone mod by AtmomiXani and a stillare clone atty. It houses a 18650 IMR High Drain 2500mAh 3.7 LI-MN battery. My coils are 0.25 Kanthal wire coming up at 0.6 Ohm's and organic cotton wool. I have made sure the firing pin in tights, spring on the firing button is fine and the...

Hi all, I just got an HCigar Neme Clone off Vape Royalty to replace my first ailing mod. I'm using it with a Doge X RDA Rebuildable Atomizer by Congrevape and 18650 batteries. I've replaced the spring with magnets and removed the beauty ring. The problem is it seems that in any usable...

Hey there vapors I recently just purchased a protank 3 with an airflow controller along with a smok kick on my nemesis clone (mechanical mod). I have a stillare v2 rda clone and I love it! But I don't particularity like to drip all the time. I use the rda around the house and im beginning to use...

I bought some Sony vtc3 18650 batteries from ebay thinking they where the real deal. I read in some other threads that it was fine to buy batteries from ebay/Amazon. I may have an unsafe mod and it scares the hell out of me. How am I supposed to know if these are fake or not? I knew not to...

Hey guys so I need help with my protank 3 ive heard a lot about the tank flooding/leaking on people so I was wondering how should I fix this? I was also wondering if it does flood would it ruin my mechanical mod or damage my battery causing a short? And lastly would you guys recommend a...

So I FINALLY got my new nemesis clone and man was I excited I cleaned it prepped it and man im blown away but I made a small mistake I tried to remove the 510 silver plated brass pin but it was completely stuck so after numerous tries I got it out with a pair of plies the problem is I accidental...

My new build is coming in the next 3-4 days and im ready DEATH TO EGOS!!! Anyways im very excited I ended up running into some extra money today so I ordered some things to go along with my current set up as of now I have Stainless steel nemesis clone protank 3 with 5 extra 1.8 ohm coils...

So ive been smoking for 3 years and have been vaping for 2 but could never quit those damn cancer sticks. Well after going through many egos and ultimately not feeling satisfied with my vaping experience I decided to pick up a mod. I ended up getting a nemesis clone with a stillare infinite...

Efest 18650 IMR Batteries (35A, 3.7V, 2500mAh) - On sale only $8.95! The Vapor Station - www.vaporstation.com - E cigs, E juice, Bitcoin, Bitcoins Genuine Efest batteries now in stock and on sale! We have 18350, 18500, 18650, and 26650 purple style Efest high drain batteries for the safest...

Been getting my feet wet with a Kamry K101. Now I want to get another mod that does not telescope. Looking at the Nemesis, King and Templar. For looks I like the King the best. But I don't want to go by looks alone. Pros and cons of all of them????

I was looking around on craigslist today and saw a guy selling some moda and atomizers. I hit him up and this is what I picked up. 1 Nemesis clone 1 igow 3 (authentic) 1 vicous ant Kraken (authentic) 1 sony vtc4 I stole all this for $80.00 The guy need the glass for the kraken so I need...

Hey everyone!! I'm just back to vaping...I fell off the wagon and went back to analogs, but with much encouragement from my good friend and ECF member Cucco I'm back!! Previously, I was using mostly eGo's..both standard and twist, with a variety of different tanks and clearo's. I started back...

Ive been really debating which one to get, and yes i am getting it from fasttech.com (clones) because im on a bit of a budget. But im wondering what you guys suggest. By the way i had just ordered a Helios clone from fasttech.com today and was wondering if the mods would be flush with the...

So I purchased a Nemesis clone, through a private party on Facebook. It was being sold as an HCigar Nemesis Clone. I received it and I have no clue if it is in fact an Hcigar or just a random Chinese mod that I just paid way too much for. The box is a really deep red/maroon with "Nemesis" and...

After searching around on ECF for different cases, I decided to go with a Pelican 1060 with the pluck and play foam insert. (both on amazon for cheap, Amazon Prime wins again) I have reserved a spot for my inbound IBTanked. Thanks to the many people who posted different examples of cases...

I have an AWESOME local shop but the mark up on the prices to have stuff now is kinda insane. I usually buy my juice from them and my batteries but when it comes to full on mods I can't justify paying double to have it now. As for example: I was in the shop today looking at a Nemesis clone. They...

Am I losing my mind or what? I went to change batteries in my Nemesis last night and for the life of me could not get the batteries to tighten up. I tried 3 different size batteries and every one of them were loose and would not fire. I fiddled with this damn thing for 2 hours, adjusting the...

Hi all, Longtime member, been away for a while enjoying my vamo, recently back doing research, reading and watching tons, looking for something more... I'm thinking mechanical... I've tried some mechs with nimbus attys and I like it. It's as if I'm tasting my own juices for the first time...