I was out in my hobby area looking through my thingamajigs and doohickeys for things to make a coil jig. I got side tracked when I found some specialty types of threaded things. I figured I'd try wrapping a couple coils.
The larger is 4mm, the smaller is 2.5mm. But they're spaced. Can they be...
So I lost a screw for my wotofo profile. I assume it’s identical to the other one which looks like this: Any idea where I might get another? It’s apparently Philips with flat, but this is not strictly speaking required. I just need a screw.
I have an Aegis solo. Great mod. But the screw in battery door is problematic. The threads in the mod side began to strip despite carefully turning counter clockwise each time to seat the cap.
Some people mentioned removing the o ring to get deeper purchase on the threads. This gave me an...
I’m posting this here hoping that more people will see it and hopefully have some more suggestions. I have a brand new Tauren Max rda and I already stripped the hex screw on the deck.
It’s a teeny tiny hex screw that control the ceramic blocks that hold the coil legs.
I’m hoping for more...
my girlfriend bought me glass screw top coca cola bottles thinking they would be okay for what we wanted to do, storing nicotine in the freezer for a long time. They are a perfect size to fit under the shelf of the ice tray.
Since these are obviously safe for drinks would they be safe to fill...
Hi everyone,
I just purchased the TVL three post RDA. It does not include the hex driver. I have several and tried them all with no luck. I just got back from Lowe’s and purchased a new $20.00 hex key set, with sizes all the way down to 1/16. Still too big. I tried metric and SAE. Nothing...
I just went to exchange the squonk PIN where the studded screw is currently in my dead rabbit that's new to me never been used and I can't get that studded screw out of the bottom to use this as a squonk any advice on how the hell to get this screw loose
Anyone have a broken Pico Mega. As stated I need the battery cap. Mine is stripped and just pops out. I know it is the cap because I have a second Mega and the cap works fine on it. I do live in Canada and I am a very fair person and if mailing is more I can send an second payment for extra...
This isn't so much of a problem for me I'm mainly just curious, what makes the part of the tank that screws into the battery black after extensive use?
Hey guys....
I won both Black and Silver nova RDAs from Daniel DJLSBVapes a short while back.
Once I got used to the very short squonk travel (for overflow) I find it to be a great little flavor powerhouse.
The Only real issue I have at all is the hex hole for the machine screws...
First time the screw broke, well must be accident..
now it broke on the 2nd siren tank !
I got a spare screw from a old atty, but now im out.
Where to buy screws from ?! Cant seem to find any on ebay
So I picked up a couple of blitzen RTAs on clearance this weekend. On one of them, the grub screw just seems to almost get tight enough and the it seems like it just goes through. I need a longer screw than the stock one. I'm guessing about 1 or 2mm longer so the barrel will still for down in...
So I’m looking into getting some wrenches for my RTA’s. I was curious if anyone has an RTA that uses SAE sized screws? It seems that they are all metric which would make sense since most are made outside the US, Liberia,and Myanmar. So can I just get a set of nice metric hex drivers instead of...
I'm running a halo reactor shorty. The screws that hold the top plate of the mod in place are loose. I'm wondering what size they are. It's a star key. Definitely smaller than a 10 (the smallest one I own). I apologize if this is the wrong place for this, (I'm new to the forum) but any help...
So I thought I would try the Berserker mini RTA. However, I cannot loosen one of the post screws and do not want to strip the screw. Any suggestions or tricks? This is a brand new tank.
On a recipe that I intended to use 6%TFA French Vanilla, I instead accidently used
6%Capella French Vanilla V2.
Does anyone have any idea how similar in strength these two flavors are?
I just left it to steep, instead of having my wife do a S&V test. It's for her.
I intended to make the...
A few years ago I joined ECF under the name of calihippy
After becoming ill and then a Brain Bleed/edema of the brain I tried to get back on ECF but of course could not. It was too much for me at the time. 2 ½ years go by coming back to ECF and learning as I could.
Fast track to the past...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.