wiring

Hi all, wanting to make an e pipe(mechanical ) and need some help with the positive connection on the bottom . Any thoughts? An old YouTube video showed a fork/spade terminal?

Hey guys I'm new here and I cant seem to find the post I am looking for so I'm sorry if this is in the wrong place but here goes: I am making a stabwood box mod and I'm having a bit if trouble getting my head around the wiring aspect of it. The mod will be duel 18650 and the chip will be the...

I'm doing a 510 swap on my rx200s and need to know what gauge/size these 3 internal wires are. I need to be sure because once I know the gauge of each stock wire I was wondering if it might even be a good idea to get one size bigger for each of them..or will this be pointless or even make it...

http://www.amazon.com/TasiHome-Adjustable-Temperature-Long-Life-Heat-Resistant/dp/B013JM4AW4/ref=sr_1_1?ie=UTF8&qid=1447810235&sr=8-1-spons&keywords=Soldering+iron&psc=1 I plan to get a Hakko or Weller station eventually, but if something like this would be adequate for a while I might just get...

I have been racking my brain trying to understand this schematic. With my limited knowledge on electrical circuits, it looks to me like an atomizer would just auto fire in this configuration. I know that this isn't the case because this is a standard design. But what are the switches...

I am planning on building an unregulated, MOSFET'ed box. My question is, if I wire 2 LG HB6 batteries in parallel to achieve a 60A continuous discharge at 3000mAh, could I wire a single, lower-amperage battery with 3000mAh to that assembly in series to increase voltage? I've read that I need at...

So what kind of wire is better out there besides kanthol? If there is any thanks!

okay. so i am making a mosfet controlled parallel 2x18650 with sony vtc 4's I need help with how to wire it. i am using a 3a momentary push button with a mosfet and adding a digital readout and an LED to let me know its on. How do i wire this all together???????? ps, im using a main killswitch...

So after building my first bottom feeder I was going to build another in a wood box..having a alot of extra room in the box and a VAMO collecting dust ive decided I want to put the chip (board? idk what the correct term would be) and screen from the VAMO into the bottom feeder...only problem is...

Ive been a member here for a while now, but do a lot more reading than posting. Ive used e-cigs and APVs for about 3 years now, and had an njoy back in, i think it was, 2006. Anyway, I've finally decided its time to build a mod. Im pretty good with repairing my own equipment, and computers, Ive...

okay so im an pretty smart with circuits but i cannot figure this out this switch has three terminals so im confused ones positive ones negative and one goes to the atty but i dont know how to connect it to the battery because there is an odd number of connections any help is appreciated. the...

I'm not stupid when it comes to electronics, but the joye 510 ego passthrough I have is killing me! I dropped it on the ground (tile floor) and it's not working now. I'm out of the warranty on it and I'm going to order anoher one when I get paid, but I'm trying to bypass the battery and just...

I keep dropping these darn things when I get off the couch and popping my solder beads. I've sent them back numerous times, but I am afraid my warranty has since expired. I took her apart completely. I broke a few connections trying to do so, but got them fixed. I feel like an idiot, because...