14250 3,2 V.....Can I use two 14250 3,6 V for HV vaping.....and live to tell.....

[sweet white mist]

14250 3,2 V.....Can I use two 14250 3,6 V for HV vaping.....and live to tell.....

 

[Dalton63841]

What are you using them in?

 

[Creniker]

All of the 14250's Ive seen are 3.7 so I wouldn't recommend that. If it was a 3v or a 3.2 v then theoretically you could.

 

[sweet white mist]

would it destroy my PV?

 

[sweet white mist]

What are you using them in?

.....to make my 3,7 V mod to 6 V mod....and I belive that I will also need a few more things....one teaspoon of crocodile tears and one black candle.....

 

[Beaverkt]

while I haven't done it myself other Vmod users have used these

Ultra IFR 14250 LFP 3.2v Rechargeable Batteries-Pair: Your source for the best electronic cigarettes / personal vaporizers in the world.

just make sure that they are 3.2 and not 3.7 also I believe the 3.2's require a different charger. ask in this thread for more informed info than I can supply.

http://www.e-cigarette-forum.com/forum/e-cigarette-video-reviews/195396-vmod.html

 

[Snakedocc]

.....to make my 3,7 V mod to 6 V mod....and I belive that I will also need a few more things....one teaspoon of crocodile tears and one black candle.....

Need to know what type of mod you are going to use them in.

 

[Beaverkt]

Need to know what type of mod you are going to use them in.

woops ya for some reason I read her saying 3.7 v mod just as V mod.

 

[Snakedocc]

woops ya for some reason I read her saying 3.7 v mod just as V mod.

I missed the " v " lol

 

[Beaverkt]

Ya I think I misunderstood I'm pretty sure she just meant 3.7 volt mod instead of Vmod

 

[sweet white mist]

Yes,I meant 3.7 V bottom fed mod from old goat......I seems that my teaspoon of crocodile tears only can mix letters in my posts......so,finally,MAY I USE 3.6 V AND NOT SPELL MY MOD IN A BURNING TORCH......

 

[Dalton63841]

If you have the original 3.7v version, that has no booster or regulator in it, then yea you can do this, as long as it is coupled with the appropriate atomizer of course(~3ohm).

Of course you need to make sure they will fit. All 14250's are not 25mm long, just like not all 14500 are 50mm long.

 

[sweet white mist]

If you have the original 3.7v version, that has no booster or regulator in it, then yea you can do this, as long as it is coupled with the appropriate atomizer of course(~3ohm).

Of course you need to make sure they will fit. All 14250's are not 25mm long, just like not all 14500 are 50mm long.

...so,it is hit or miss,I guess....Thank You very much.....