510 connection worn out.

Discussion in 'New Members Forum' started by arsen123, Aug 21, 2013.

Thread Status:
Not open for further replies.
Image has been removed.
URL has been removed.
Email address has been removed.
Media has been removed.
  1. arsen123

    arsen123 New Member

    Joined:
    Aug 21, 2013
    Location:
    bridgeport ct usa
    I have the Ego-C-Twist and a vivi nova v1, which has a little extension on the 510 connection, at first it screwed into the battery fine, now after a bout a week the batteries "ridges" inside the 510 connection are worn out and smooth, nothing will screw in, NOTHING!, so i have cam up is i purchased a sleeve/cone and i am going to superglue it onto the bottom of my tank so then i can just screw in the tank through the bottom ridges. Anyone think this will work?
     
  2. thormak

    thormak Senior Member Verified Member ECF Veteran

    Joined:
    Aug 11, 2013
    Location:
    Klang, Selangor, Malaysia
    As long as the connector contact the atty and body, it will work fine.
    But not practical tho, what if you wanted to change or remove it for cleaning?
    You will have to superglue it every single time.
     
  3. Tvan

    Tvan Super Member ECF Veteran

    Supporting member
    Joined:
    Jul 26, 2013
    Location:
    NY
    Hello arsen. If you are referring to glueing the tank to the beauty ring I don't see why it wouldn't work. I'm confused as to how the threads ended up being smooth. Did you strip them?
     
  4. WarHawk-AVG

    WarHawk-AVG Vaping Master ECF Veteran

    Joined:
    Jul 27, 2013
    Location:
    H-Town
    using superglue when dry acts as an insulator... which means you will more than likely not get the juice firing thru to your coils

    did you accidentally crossthread it or something...
     
  5. Tvan

    Tvan Super Member ECF Veteran

    Supporting member
    Joined:
    Jul 26, 2013
    Location:
    NY
    This is correct! I was thinking the threads on the beauty ring being the contact. I forgot about the glue. Sorry.
     
  6. arsen123

    arsen123 New Member

    Joined:
    Aug 21, 2013
    Location:
    bridgeport ct usa
    I'm am really no sure, although i do believe it is because of the tank, if you google vivi nova v1, you will see that the connection has a little "nub" that come out of it, which works like a spring, while its screwed in tight it is pushed together like a spring, like all spring they want to get loose, so the tank is being unscrewed by the little "nub" on its own.
     
  7. arsen123

    arsen123 New Member

    Joined:
    Aug 21, 2013
    Location:
    bridgeport ct usa
    So do you think it will work, All i will be doing is super gluing the the "cone" "sleeve" beauty ring" whatever u wana call it onto the base of my tank, it will not be super glued onto anything on the battery, the air holes will be clear/
     
  8. arsen123

    arsen123 New Member

    Joined:
    Aug 21, 2013
    Location:
    bridgeport ct usa
    i can still unscrew the bottom base, the only difficulty i will have with cleaning is just cleaning the threads on the bottom of the base, which i can just use a ear swab.
     
  9. HughDaHand

    HughDaHand Super Member Verified Member ECF Veteran

    Joined:
    Nov 28, 2012
    Location:
    Swartz Creek, MI
    So if I understand you right you want to glue a ego cone to the bottom of your vivi nova so you can screw it on with the threads from the beauty ring. This would make it connect more like an evod or t3. The major problem I see here is the glue acting as a insulator not allowing for a good ground. It could work if you can find some kind of conductive glue or if the original 510 connector still makes contact after the attaching the beauty ring. I would also think that the glue holding might be a problem in the long run. A better idea might be a new battery or maybe try an evod.
     
: evod
Thread Status:
Not open for further replies.

Share This Page