Actual 801/901 Connectors

[500KV]

Great ideas; and don't forget to throw in some JB Weld.
Works good to nail stuff down and give mechanical strength where needed. It's also insulated to 10KV.

 

[billyboy689]

heres a budget diy kit
801 only but takes either 3.7v or 6v batt combo in the s/steel tube
2 solder points even with an led attached alongside switch if desired
no threaded end where batt goes in just a push in plug ,still very sturdy
atomiser end just gets glued in after switch fitment is completed
this is the fischer price end of the ecig world but works a treat
total assembly time 15 mins
ive stopped taking these any further , was going to make a threaded end where the battery goes in but have since gone off the whole mod due to other developements in the ecig world
ive probably got 20 of these scattered on my workbench right now taking up room getting pushed aside as i do other stuff
you could call it the pro dodgy not best ecig in the world budget mod

any takers?

 

[Darlene7]

I'll buy at least one for my DSE 801 if they will work with it - don't even know what I would have to do with it yet, but am sure the forum will show us how to fix it.
Darlene

 

[Vape]

heres a budget diy kit
801 only but takes either 3.7v or 6v batt combo in the s/steel tube
2 solder points even with an led attached alongside switch if desired
no threaded end where batt goes in just a push in plug ,still very sturdy
atomiser end just gets glued in after switch fitment is completed
this is the fischer price end of the ecig world but works a treat
total assembly time 15 mins
ive stopped taking these any further , was going to make a threaded end where the battery goes in but have since gone off the whole mod due to other developements in the ecig world
ive probably got 20 of these scattered on my workbench right now taking up room getting pushed aside as i do other stuff
you could call it the pro dodgy not best ecig in the world budget mod

any takers?

That's pretty sweet lookin!

 

[warp1900]

how much? :=)

 

[billyboy689]

i dont want to go off topic in this thread so for my mod issues i will start a thread in the main modders forum

there is a "manufacturer" who has a presence on this site who could supply the required items some people are seeking
not too sure about now days but he has in the past
if asked nicely you never know youre luck
im sorry but i cant really directly or indirectly say who that is , even by pm- its not my right to say
i know thats a hell of a teasing statement to make but at least by saying it you now know that it is possible to get your hands on this stuff if you try hard enough
i obtained a selection of various things a while ago and had a few creative moments with them
i dont use these bits myself anymore,too fiddly and not suited to my style of mods

 

[kamikaze]

I remember that Bastage was looking for DSE 901 battery connectors in small quantities and a manufacturer replied to his post.

 

[junk_male]

Billyboy, could that be moded for a 901?

 

[Nuck]

Any news on getting actual connectors?

 

[Kewtsquirrel]

Any news on getting actual connectors?

I've got just under 30 right now, ordered a small quantity at first, if there is enough demand I could get ahold of more, they'd be about $3 per.

 

[EldarKinSlayer]

801n and 901 connectors for me.

 

[TDM]

Steve are puresmoker said he may have them available after the prodigy gets going

 

[Kewtsquirrel]

Steve are puresmoker said he may have them available after the prodigy gets going

Eh I can get both the 801 and 901 connectors, I just need to know if it would be worth my while to order them and if theres any actual interest. Shipping from China isn't cheap.

 

[SmokinScott]

heres a budget diy kit
801 only but takes either 3.7v or 6v batt combo in the s/steel tube
2 solder points even with an led attached alongside switch if desired
no threaded end where batt goes in just a push in plug ,still very sturdy
atomiser end just gets glued in after switch fitment is completed
this is the fischer price end of the ecig world but works a treat
total assembly time 15 mins
ive stopped taking these any further , was going to make a threaded end where the battery goes in but have since gone off the whole mod due to other developements in the ecig world
ive probably got 20 of these scattered on my workbench right now taking up room getting pushed aside as i do other stuff
you could call it the pro dodgy not best ecig in the world budget mod

any takers?

Sure, I'm interested.

 

[makdevo]

I am interested in 801 connectors. I will buy 20 just to make it worth your while.

 

[Kewtsquirrel]

I am interested in 801 connectors. I will buy 20 just to make it worth your while.

Thats what I needed to hear, my next order from china should be in a week or two and I'll go ahead and stock up on 801/901 connectors for you guys.

I don't need a minimum quantity of 1000 or anything before I can order, but if enough people want connectors (maybe 150-200 between everyone?) I'll order early to get you taken care of.

 

[Nuck]

I'll be grabbing 10 of each.

 

[nicowolf]

Me too. I'll take 10 of each.

 

[Sunshyn]

I finally got to try the 801 and am very interested in playing around with some mods. I'd be very interested in five connectors or so.

 

[Mary Kay]

I'd like 5 901"s. I am not into modding but I have a son and Grandson who will be very interested when I tell them to make me one..if they want to eat again that is.