So I recently dove headfirst into gennys and picked up a nextiny. Building it really couldn't easier other then that tiny negative screw. When it wants to play nice it will vape like a dream. Without the top cap on it'll literally empty the resouvour, but as soon as I get everything together it gets an occas airlock and quits wicking.
At the moment my build is 28g kanthal 5 wrap and 14x30mm of 300 mesh. I'm guessing since it wicks properly without the pressure seel my build is doing its job.
To fill I throw on the afc and top o-ring then fill it up almost to the top. Then I screw down the top cap with the afc closed and let it sit to slowly "depressurize". I get a little leaking from the air flow but not much.
TLDR; what can I do to stop getting random airlocks and a mouth full of death?
At the moment my build is 28g kanthal 5 wrap and 14x30mm of 300 mesh. I'm guessing since it wicks properly without the pressure seel my build is doing its job.
To fill I throw on the afc and top o-ring then fill it up almost to the top. Then I screw down the top cap with the afc closed and let it sit to slowly "depressurize". I get a little leaking from the air flow but not much.
TLDR; what can I do to stop getting random airlocks and a mouth full of death?