ammit 25 leaking out of 510

[fifamymaingame]

Almost certain its the 510 thats leaking maybe out the air flow too? Thought was me refilling with the juice flow open but now i think its the airflow or 510 couldnt be my wick no it was fine for a day

Going to try screwing the base on the tank more when i took it apart there was tons just right where the deck screws

 

[Tonee N]

You had the liquid flow control closed when filling it I assume?
I own 2 and haven't had any issues.

Sent from my SAMSUNG-SM-G891A using Tapatalk

 

[fifamymaingame]

I keep forgetting to shut it when filling

 

[fifamymaingame]

Just unscrewed the deck seems to be right about there its leaking cleaned everything im the chamber moved the wick around

 

[Tonee N]

I see you have the single deck, i have the dual.

Sent from my SAMSUNG-SM-G891A using Tapatalk

 

[fifamymaingame]

Yeah sure do noticed i get juice in the 510 a bit think that it was leaking from not closin: the jfc? Or not screwing the deck im enough?

 

[Tonee N]

It will happen if the control ring isn't tightened down enough.
The easiest way is to take the cone/chimney and install it with the deck then add the glass section and top cap.

Sent from my SAMSUNG-SM-G891A using Tapatalk

 

[Tonee N]

Try that. You will be able to see exactly how loose or tight the liquid flow control ring will be before you fill it.
Hth

Sent from my SAMSUNG-SM-G891A using Tapatalk

 

[fifamymaingame]

Will try that letting everything dry out

How should i be lineing the chamber and deck notcing when its screwed on all the way tight the jfc is open

 

[fifamymaingame]

Screwed on as tight as i can get

 

[Tonee N]

Just make sure you can still adjust the flow control pretty easy without leaving a gap at the ring.

Sent from my SAMSUNG-SM-G891A using Tapatalk

 

[fifamymaingame]

Ok so now after screwing glass on its super hard to move the jfc and if i go backwards glass unscrews lol then when i think its tight i can't move the jfc aye


Yeah now its so right i cant move the jfc then when i unscrew the glass comes off

 

[Tonee N]

It's too tight, take the glass back off and loosen it up a little more.

Sent from my SAMSUNG-SM-G891A using Tapatalk

 

[fifamymaingame]

Think i got it closed the jfc when i filled and its spinning freely

 

[Tonee N]

You should be able to open and close the jfc when you turn the afc at the bottom now.

Sent from my SAMSUNG-SM-G891A using Tapatalk

 

[fifamymaingame]

Yeah sure am able to moved the coil up a bit getting spit back now sigh i give up

 

[Tonee N]

It's just flooded now. Take a paper towel put it over the afc and blow down into the tank.

Sent from my SAMSUNG-SM-G891A using Tapatalk

 

[fifamymaingame]

Flavors muted so got no choice

 

[fifamymaingame]

Still get some leak under
Neath nothing major tho

 

[Milan381]

Now when you checked everything else,its all about wicking.In post #4 i can see your wick is dry,thats why you get muted flavour (or you fired it without tank on before taking a picture).Take a look at my setup...Make sure you cotton doesnt cover bottom airflow

Sent from my LG-D855 using Tapatalk