An Affordable RBA 2.0

Discussion in 'Reos Mods' started by redeyedancer, Mar 20, 2013.

Thread Status:
Not open for further replies.
Image has been removed.
URL has been removed.
Email address has been removed.
Media has been removed.
  1. redeyedancer

    redeyedancer Forum Supplier ECF Veteran

    Joined:
    Feb 4, 2010
    Location:
    Maine
    I have learned some lessons from the first atomizer I modded I got it right this time . This atomizer is user friendly .The internal base is ceramic I love this because the coil can touch the base and not cause a short and it makes wetting the coil easy . Your opinions are welcome I just ordered the parts to make these I think this one is a winner . This is a modified dripping atomizer not my own creation

    http://[​IMG]
    http://[​IMG]
    http://[​IMG]
    http://[​IMG]
     
  2. Roccov

    Roccov Ultra Member Verified Member ECF Veteran

    Joined:
    Nov 22, 2012
    Location:
    Philly
    I like the ceramic base idea. Very nice.
     
  3. Gioajack

    Gioajack Ultra Member Verified Member

    Joined:
    Jul 20, 2012
    Location:
    Conifer, Colorado
    Apparently my beta test unit is lost in the mail. Must have something to do with the government's sequestration.


    Jack
     
  4. Revmann

    Revmann Full Member Verified Member

    Joined:
    May 16, 2012
    Location:
    Clearwater, FL
    I was going to order another ERA or Hornet for my Grand, due to liking side air holes. I am going to hold off until this one pops up. This looks very promising.
     
  5. Emris

    Emris Time Lord Verified Member ECF Veteran

    Just couldn't wait could ya? :)
     
  6. redeyedancer

    redeyedancer Forum Supplier ECF Veteran

    Joined:
    Feb 4, 2010
    Location:
    Maine
    Nope I had to share
     
  7. redeyedancer

    redeyedancer Forum Supplier ECF Veteran

    Joined:
    Feb 4, 2010
    Location:
    Maine
    Or a fellow juice junky slipped into your mail box
     
  8. JC Okie

    JC Okie REOnaut Verified Member ECF Veteran

    Supporting member
    Joined:
    Jul 2, 2010
    Location:
    Tulsa, OK
    Which REOs will it fit? All of them? (Dreaming.) I'm definitely in line for one. You have any idea how long it will be before you have these put together and available? Looks great....I like the Phillips head screws; can't beat that.
     
  9. redeyedancer

    redeyedancer Forum Supplier ECF Veteran

    Joined:
    Feb 4, 2010
    Location:
    Maine
    I asked my self the same ? tonight . I milled these down to fit the grand the mini 2.1 and the vv grand I will see if I can make it work with the 2.0 as well .
    I would say 3 weeks would be the earliest . Yes these screws are fillips and large enough people wont have a problem with them . The only down side to the atty will be attaching the coil the posts are not tall . I find using longer tails makes it fairly simple
     
  10. serenity21899

    serenity21899 Vaping Master Verified Member ECF Veteran

    Supporting member
    Joined:
    Jan 18, 2013
    Location:
    Antioch IL
    Haven't mastered the first one yet, but I'm in. :)
     
  11. pianoguy

    pianoguy Vaping Master Verified Member ECF Veteran

    Supporting member
    Joined:
    Nov 4, 2009
    Location:
    Apple Valley, MN
    Looks great, Rob!
     
  12. Norman Clature

    Norman Clature Super Member Verified Member ECF Veteran

    Joined:
    Feb 19, 2012
    Location:
    Athens, GA, USA
    I'm of the opinion that I want one! HA!

    Besides the ceramic base, near the bottom on the outside before the final threading the brown/chrome/bronze colored part looks "tapered." Does that mean it will behave more like the cherished "Chalice" and feed out and drain back in a bit differently than the Reomizer 1.0? And will it not need the rubber 0-rings?

    Please add me to the "pre-order" list!

    HA!

    Norman
     
  13. rickyshuman

    rickyshuman Full Member Verified Member

    Joined:
    Feb 16, 2013
    Location:
    new mexico
    Looks like a winner sign me up. I'm really frustrated trying to find good RBA's that are availible for sale.
     
  14. redeyedancer

    redeyedancer Forum Supplier ECF Veteran

    Joined:
    Feb 4, 2010
    Location:
    Maine
    I use o rings on all the rbas I use . The reason the reomizer leaks is the cap threads not the base . This atomizer has a bowl and it has more threading so leaking is not a issue . As far as how it vapes no different then a chalice or a era or a reomiser they all vape the same in my opinion .You hear people raving about how great this atomizer is over that atomizer take my word for it they all vape alike . If they both have the same coil and wick and the air inlet is the same they will vape the same
     
  15. oldbroad

    oldbroad I'll never again go outside the box Verified Member ECF Veteran

    Supporting member
    Joined:
    Dec 5, 2009
    Location:
    Mi./Reoville
    Oh Rob!!! This is awesome news! I want two! ( at least:D)
    That is sweet looking!
     
  16. JC Okie

    JC Okie REOnaut Verified Member ECF Veteran

    Supporting member
    Joined:
    Jul 2, 2010
    Location:
    Tulsa, OK
    I'm ready. I'm excited. I don't think we'll have much trouble connecting the coil to the posts....but if we do, we'll figure it out. I like the fact that it has a bowl.....that's the thing that makes me like the Chalice over some of the others. Can't wait.

    Thanks for not giving up on the quest for another RBA for us, Rob. I know you have a lot on your plate right now and this just makes the pile higher. :)
     
  17. Ratman

    Ratman Ultra Member Verified Member ECF Veteran

    Joined:
    Jul 10, 2012
    Location:
    Tulsa OK
    I like the way the Reomizer vapes and with the right o-ring setup, I do not have much leaking either. My only knock on it the how fragile the posts are on it. The bowl and placement of the juice hole are nice on this. Is the post design different where it will be a little sturdier for times I forget and try to unscrew it by the posts?
     
  18. Norman Clature

    Norman Clature Super Member Verified Member ECF Veteran

    Joined:
    Feb 19, 2012
    Location:
    Athens, GA, USA
    Yeah; that's what I was trying to ask. I just didin't use the correct terminology. The "bowl" is what I saw that looked different (besides the ceramic base and perhaps the posts being more to one side, or perhaps that's an optical illusion in the first picture?)

    Thanks Robert,

    Norman
     
  19. whatitstrue

    whatitstrue Ultra Member Verified Member ECF Veteran

    Joined:
    Sep 16, 2011
    Location:
    Phoenix, AZ.

    Now you got me interested. :) That was my main issue with the original REOmizer.

    Looking forward to more updates!! :thumbs:
     
  20. Birchi

    Birchi Full Member Verified Member

    Supporting member
    Joined:
    Jan 30, 2013
    Location:
    SE Virginia
    Awesome! I will be pulling the trigger on one of your mods in the next week or two (still deciding between a mini 2.1 and a Grand). This atty looks awesome on the REO, I'd like to see a pic of it on a mini, just for comparison. I like that the ceramic cup will reduce the chance of shorting, great addition.

    I might wait until you have these ready to place my order.. its gonna be tough :D
     
Thread Status:
Not open for further replies.

Share This Page