Any suggestions for replacing an EVOD setup?

[Berryc]

Hello,
Been really happy this past year with a EVOD Clearomizer setup (ego twist battery).

My tanks are starting to crack, so I'm either going to replace with new EVOD tanks or find a new setup.

Honestly, other than these cracking tanks, I haven't had any issues and it's been a terrific experience. I just don't follow device trends closely enough to know what else is out there.

Anything out there worth switching to?

Thanks in advance!

 

[ckquatt]

Go with a Protank. It's glass so the liquid won't crack it, and they use the same heads as the evod clearomizers. If you know/learn how to rebuild those heads you'll never have to buy another pack of coils!

 

[Berryc]

Thanks ckquatt! Do you know if Protanks are compatible with the ego c twist battery?

 

[Berryc]

Also, looks like there are few different models of Protanks (1,2,3). Should I just get the newest model?

 

[Berryc]

OK, I think I'm going with this: Kanger mini Protank-2 clearomizer – KangerTech

It's a bit more expensive tank, but if it lasts longer than 12 months, I'll be happy.

Thanks again!

 

[FCastle]

The Protank 3 uses dual coils. I tried the Evod Glass that uses the same dual coils. Goes through liquid and battery charge ridiculously fast, and flavor is much weaker than my regular Evods. The Protank 2 uses the same coils as your Evods, I'd recommend the mini version. Smaller tanks usually produce better vapor.

 

[Vchick]

I switched to the mini pro tank 3 also, from the regular evod tank. Still using evod batteries and while I don't like big tube mods, they lood like a mini version. I like that I can use my own drip tips on them.

love, love, love them.....

 

[Berryc]

Will the mini-protank 2 (I just purchased it online) be essentially the same experience as the evod - just using glass and drip tips?

 

[K31Scout]

OK, I think I'm going with this: Kanger mini Protank-2 clearomizer – KangerTech

It's a bit more expensive tank, but if it lasts longer than 12 months, I'll be happy.

Thanks again!

Good choice and you can get an Aerotank adjustable air flow base for these for about $4 if you don't like the draw. I've been rebuilding the coils with cotton successfully. I think the Aero base helps with gurgle and leakage also although I don't have much trouble with the standard base.

 

[FCastle]

Will the mini-protank 2 (I just purchased it online) be essentially the same experience as the evod - just using glass and drip tips?

The draw will probably be more airy, otherwise should be pretty close.