Anybody Using A Kabuki?

Status
Not open for further replies.

newyork13

Vaping Master
ECF Veteran
Verified Member
Nov 9, 2013
4,402
21,187
western Massachusetts
On the site I purchase from here in the U.K. It doesn't say if it's fat or thin.

As for dimensions, as you can see from the pic above it's longer, the diameter is possibly a tiny bit smaller than the very end of the stock, however the bore is a lot smaller, if you look at the inside of the stock then the bore does get narrower, the Kochi bore is still narrower than that but all the way through, I hope that makes sense.

IMO it does vape better, and I think I get a tad more vapour with it, not sure if that's just in my head though because I know it's more of a satisfying draw for me ?

Lastly and this is what probably makes the difference, I think it's a far better build quality than the stock drip tip, the 510 part that fits into the tank is metal and has two o rings, it just seems to complement the build quality of the Kabuki, again just my opinion. (My second for my second tank is on order I prefer that much)

It is expensive I will admit, but you don't put budget tyres on a Ferrari do you.
Thanks. I completely agree about the esthetics, and about the Ferrari. I was curious about the diffs in vape quality, and though we all accept subjectivity, I suspected it would be better.
I will be ordering a couple of Kochi's.
But, you did embarrass me. I will also remove the budget tires from my Ferrari and get a couple of high performance tires. Maybe I'll get four.
 

Nailz

Vaping Master
ECF Veteran
Verified Member
  • Jun 6, 2013
    6,582
    30,396
    Wichita, KS
    So got this setup from a member here today :)

    6mQcgoF.jpg


    A few questions, this thread way to long to read through it all, where can I get spare orings and glass tanks for the kabuki, and is there a rebuilable head I can use with it, will probably stick with the triton 1.8 ohm clapton coils, but if there is a rebiulbable head, then would least like to try it.
     

    Katdarling

    I'm still here on ECF... sort of. ;)
    Supporting Member
    ECF Veteran
    Verified Member
    Jan 25, 2011
    32,572
    167,592
    Utopia

    ENAUD

    Resting In Peace
    ECF Veteran
    Verified Member
    Jul 23, 2013
    9,810
    64,140
    Bordertown of ProVariland and REOville
    So got this setup from a member here today :)

    6mQcgoF.jpg


    A few questions, this thread way to long to read through it all, where can I get spare orings and glass tanks for the kabuki, and is there a rebuilable head I can use with it, will probably stick with the triton 1.8 ohm clapton coils, but if there is a rebiulbable head, then would least like to try it.
    Gumption Depot / House of Hybrids for the O-rings. I personally recommend the silicon version, they make my life so much easier with my Kabuki tanks that I won't use anything else. There was a lot of talk about the rebuildable Nautilus deck that is available on the Bay, can't recall the name of it, very mixed reviews, a few of us had great success, probably more gave a thumbs down. My inner nets is very limited so sorry I can't offer you more info or linkies right now...
     

    tearose50

    Vaping Master
    ECF Veteran
    Verified Member
    Feb 2, 2011
    6,608
    14,326
    Tennessee :-)
    There is a rebuildable head that some brave souls have conquered, but it isn't too popular. I don't even remember it's name. :|

    In the USA there is: https://squareup.com/store/houseofhybrids for lots of Kabuki parts and goodies.

    https://thezfo.com/ for some of the above and other HOH products as well.

    Glass also from a few places (besides Fasttech) Spectrum Glass, Bedazzled, Phiniac...and sometimes elsewhere.
     

    Katdarling

    I'm still here on ECF... sort of. ;)
    Supporting Member
    ECF Veteran
    Verified Member
    Jan 25, 2011
    32,572
    167,592
    Utopia

    Katdarling

    I'm still here on ECF... sort of. ;)
    Supporting Member
    ECF Veteran
    Verified Member
    Jan 25, 2011
    32,572
    167,592
    Utopia

    ENAUD

    Resting In Peace
    ECF Veteran
    Verified Member
    Jul 23, 2013
    9,810
    64,140
    Bordertown of ProVariland and REOville
    Gosh @Katdarling you only need to tell me once, I got it :lol:

    Thanks all for the replies :)

    Think I won't bother with that RBA head, looks a PITA to build and getting a really good vape from the triton 1.8 ohm clapton coils anyway :)
    Yeah, the Buki is the best attie for the Nauti style use 'em an toss 'em convenience coils. There are other better options for a rebuildable vape. At least that's my take on it.
     

    Katdarling

    I'm still here on ECF... sort of. ;)
    Supporting Member
    ECF Veteran
    Verified Member
    Jan 25, 2011
    32,572
    167,592
    Utopia
    Totally agree, E.

    Gosh @Katdarling you only need to tell me once, I got it :lol:

    Thanks all for the replies :)

    Think I won't bother with that RBA head, looks a PITA to build and getting a really good vape from the triton 1.8 ohm clapton coils anyway :)


    You are so welcome, Nailz! I just wasn't kontent with a double post. :blink:

    :lol:

    That thing, that VV WTH rebuildable thingie is a beyond a PITA. It's a true frustration piece of gear. I think you're wise to stay with the Triton coils.
     

    gnees

    Vaping Master
    ECF Veteran
    Verified Member
    Mar 31, 2014
    3,061
    25,789
    Zephyrhills Fl.
    Nailz, parts for the 'Buki can be obtained from Zen's store: https://squareup.com/market/houseofhybrids/

    And the one RB head I know of is the VVTF (otherwise known as the VV w TF - me no likey at all). I'm not sure who else carries it but it's still on the Bay.

    http://www.ebay.com/itm/ORIGINAL-VV...2A-REBUILDABLE-COILS-HEADS-ATTY-/162134885607

    What?

    Nailz, parts for the 'Buki can be obtained from Zen's store: https://squareup.com/market/houseofhybrids/

    And the one RB head I know of is the VVTF (otherwise known as the VV w TF - me no likey at all). I'm not sure who else carries it but it's still on the Bay.

    http://www.ebay.com/itm/ORIGINAL-VV...2A-REBUILDABLE-COILS-HEADS-ATTY-/162134885607

    One more time.

    Nailz, parts for the 'Buki can be obtained from Zen's store: https://squareup.com/market/houseofhybrids/

    And the one RB head I know of is the VVTF (otherwise known as the VV w TF - me no likey at all). I'm not sure who else carries it but it's still on the Bay.

    http://www.ebay.com/itm/ORIGINAL-VV...2A-REBUILDABLE-COILS-HEADS-ATTY-/162134885607

    hommedia.png
     

    gnees

    Vaping Master
    ECF Veteran
    Verified Member
    Mar 31, 2014
    3,061
    25,789
    Zephyrhills Fl.
    Nailz, parts for the 'Buki can be obtained from Zen's store: https://squareup.com/market/houseofhybrids/

    And the one RB head I know of is the VVTF (otherwise known as the VV w TF - me no likey at all). I'm not sure who else carries it but it's still on the Bay.

    http://www.ebay.com/itm/ORIGINAL-VV...2A-REBUILDABLE-COILS-HEADS-ATTY-/162134885607

    What?

    Nailz, parts for the 'Buki can be obtained from Zen's store: https://squareup.com/market/houseofhybrids/

    And the one RB head I know of is the VVTF (otherwise known as the VV w TF - me no likey at all). I'm not sure who else carries it but it's still on the Bay.

    http://www.ebay.com/itm/ORIGINAL-VV...2A-REBUILDABLE-COILS-HEADS-ATTY-/162134885607

    One more time.

    Nailz, parts for the 'Buki can be obtained from Zen's store: https://squareup.com/market/houseofhybrids/

    And the one RB head I know of is the VVTF (otherwise known as the VV w TF - me no likey at all). I'm not sure who else carries it but it's still on the Bay.

    http://www.ebay.com/itm/ORIGINAL-VV...2A-REBUILDABLE-COILS-HEADS-ATTY-/162134885607

    hommedia.png
     
    Status
    Not open for further replies.

    Users who are viewing this thread