Aspire CE5-S Bottom Vertical Coil (BVC) Clearomizer, 1.8 ml in Rainbow
Aspire's CE5-S clearomizer uses the Aspire Bottom Vertical Coil (BVC) technology - BVC coils have improved longevity, and ensure great flavor and lots of vapor from your e-liquid. The Aspire CE5-S BVC clearomizer is made of stainless steel with an attractive rainbow finish, and has a PCTG plastic tank tube - PCTG offers greater clarity than polycarbonate plastic. The CE5-S has two windows on each side of the clearomizer, allowing you to see how much e-juice remains inside. It has 1.8 ml capacity and is easy to fill or replace the coil!
To change the coil of the Aspire CE5-S, simply unscrew the base/bottom of the clearomizer (make sure it's empty first), unscrew the old coil and screw in a new one. To fill with e-liquid, take the clearomizer tube and tilt a slight angle. Fill with 1.8 ml of e-liquid (be careful not to drip any e-juice down the center tube, that is for airflow.) Finally, screw the base back on and set aside for a few moments to allow the coil to become fully saturated. Please note that the Aspire CE5-S, like the Aspire K1, is only compatible with these Aspire BVC coils, and NOT with the Aspire NAUTILUS BVC coils.
The Aspire CE5-S is 510/eGo threaded and will work on all 510 threaded eGo batteries and Mod's without the need for an adapter - it matches great with our Rainbow Twist battery and a Rainbow Drip tip(see picture above). To use with 510 devices, you will need an eGo-510 connector.
The Aspire CE5-S features a removable 510 drip tip and comes pre-installed with a 1.8 ohm coil - recommended voltage range is 4.2-5.0V.
Dimensions: Height 82mm (3.2") (with drip tip installed) / Diameter 14mm (0.55")
Replacement BVC coils can be found here:
Aspire's CE5-S clearomizer uses the Aspire Bottom Vertical Coil (BVC) technology - BVC coils have improved longevity, and ensure great flavor and lots of vapor from your e-liquid. The Aspire CE5-S BVC clearomizer is made of stainless steel with an attractive rainbow finish, and has a PCTG plastic tank tube - PCTG offers greater clarity than polycarbonate plastic. The CE5-S has two windows on each side of the clearomizer, allowing you to see how much e-juice remains inside. It has 1.8 ml capacity and is easy to fill or replace the coil!
To change the coil of the Aspire CE5-S, simply unscrew the base/bottom of the clearomizer (make sure it's empty first), unscrew the old coil and screw in a new one. To fill with e-liquid, take the clearomizer tube and tilt a slight angle. Fill with 1.8 ml of e-liquid (be careful not to drip any e-juice down the center tube, that is for airflow.) Finally, screw the base back on and set aside for a few moments to allow the coil to become fully saturated. Please note that the Aspire CE5-S, like the Aspire K1, is only compatible with these Aspire BVC coils, and NOT with the Aspire NAUTILUS BVC coils.
The Aspire CE5-S is 510/eGo threaded and will work on all 510 threaded eGo batteries and Mod's without the need for an adapter - it matches great with our Rainbow Twist battery and a Rainbow Drip tip(see picture above). To use with 510 devices, you will need an eGo-510 connector.
The Aspire CE5-S features a removable 510 drip tip and comes pre-installed with a 1.8 ohm coil - recommended voltage range is 4.2-5.0V.
Dimensions: Height 82mm (3.2") (with drip tip installed) / Diameter 14mm (0.55")
Replacement BVC coils can be found here:
