Aspire nautilus X Top-Filling Clearomizer tank in Black
The Nautilus X is the latest top-filling clearomizer by Aspire. The Aspire nautilus X is the successor to the iconic Aspire Nautilus, delivering exceptional flavor with innovative U-Tech coil technology.
The Aspire Nautilus X has an ultra low profile and would make an excellent companion to smaller devices like the Eleaf iStick 30W for a stealthy vape. The Nautilus X utilizes cup-like tank design and adjustable airflow at the top, making this atomizer practically leak-proof. The Aspire Nautilus X has 2 ml e-liquid capacity and a pyrex glass tank. Adjusting airflow is easy: grip and spin the top cap to expose or close off the dual airflow holes at the top.
The Aspire Nautilus X is a top-fill tank, meaning you do not have to remove the tank and unscrew the base each time you need to refill. To fill with e-liquid, simply grip the top cap and unscrew. Grab your favorite e-liquid and fill with about 2ml of juice. Please do not overfill. Then, take the top piece and screw it back on securely.
Similar to the Aspire Cleito tank, the Nautilus X does not have a chimney. Instead, the coil head runs the entire length of the tank, from the base up to the mouthpiece. This helps keep the number of tank parts to a minimum. The Aspire Nautilus X can be fully disassembled and is very easy to clean.
Nautilus X coil heads use the latest U-Tech technology from Aspire: vapor flows through an U-shaped chamber inside the coil, passing over the kanthal wire twice before inhalation. This re-imagined airflow path results in enhanced flavor from your e-juice.
Changing the coil on the Nautilus X is very easy. Simply unscrew the top cap and then unscrew the used coil. You may also remove the glass tube (by pulling it off) to make unscrewing the coil head easier (make sure the tank is completely empty of any e-liquid before removing the glass tube.) Then, screw a new coil head into the base. Please note: Any time you install a new coil, we recommend priming it by dripping a few drops of e-juice onto the exposed cotton on the sides of the coil head. After installing the coil into the Nautilus X and filling the tank, always set it aside for a few minutes - this will allow the cotton wicking to become fully saturated with e-liquid before you fire your device.
The Aspire Nautilus X is 510-threaded and has a 22mm diameter - it will sit flush and look great on most 510-threaded mods. It comes with a non-removable delrin mouthpiece.
The Aspire Nautilus X is designed to provide a hassle-free vaping experience, with a focus on premium flavor from your e-juice. If you are a mouth-to-lung vaper, and prefer compact micro tanks, you must try the Aspire Nautilus X!
Features:
New U-Tech coil design improves flavor
Quick and Easy Top-fill
Leaf-proof "Cup" Design
Adjustable Airflow Control at the top
Ultra low profile
510 connector
Stainless Steel construction
Pyrex Glass Tank for protection from harsh liquids
Delrin mouthpiece
Capacity is 2 ml
Includes:
1 x Aspire Nautilus X tank (pre-installed with a 1.5 ohm coil / 14-22W range)
1 x extra coil (1.5 ohm / 14-22W range)
1 x spare pyrex glass tube
1 x Packing box to store the tank when not in use
Dimensions: Height 45mm (1.7") / Diameter 22mm (0.86")
The Nautilus X is the latest top-filling clearomizer by Aspire. The Aspire nautilus X is the successor to the iconic Aspire Nautilus, delivering exceptional flavor with innovative U-Tech coil technology.
The Aspire Nautilus X has an ultra low profile and would make an excellent companion to smaller devices like the Eleaf iStick 30W for a stealthy vape. The Nautilus X utilizes cup-like tank design and adjustable airflow at the top, making this atomizer practically leak-proof. The Aspire Nautilus X has 2 ml e-liquid capacity and a pyrex glass tank. Adjusting airflow is easy: grip and spin the top cap to expose or close off the dual airflow holes at the top.
The Aspire Nautilus X is a top-fill tank, meaning you do not have to remove the tank and unscrew the base each time you need to refill. To fill with e-liquid, simply grip the top cap and unscrew. Grab your favorite e-liquid and fill with about 2ml of juice. Please do not overfill. Then, take the top piece and screw it back on securely.
Similar to the Aspire Cleito tank, the Nautilus X does not have a chimney. Instead, the coil head runs the entire length of the tank, from the base up to the mouthpiece. This helps keep the number of tank parts to a minimum. The Aspire Nautilus X can be fully disassembled and is very easy to clean.
Nautilus X coil heads use the latest U-Tech technology from Aspire: vapor flows through an U-shaped chamber inside the coil, passing over the kanthal wire twice before inhalation. This re-imagined airflow path results in enhanced flavor from your e-juice.
Changing the coil on the Nautilus X is very easy. Simply unscrew the top cap and then unscrew the used coil. You may also remove the glass tube (by pulling it off) to make unscrewing the coil head easier (make sure the tank is completely empty of any e-liquid before removing the glass tube.) Then, screw a new coil head into the base. Please note: Any time you install a new coil, we recommend priming it by dripping a few drops of e-juice onto the exposed cotton on the sides of the coil head. After installing the coil into the Nautilus X and filling the tank, always set it aside for a few minutes - this will allow the cotton wicking to become fully saturated with e-liquid before you fire your device.
The Aspire Nautilus X is 510-threaded and has a 22mm diameter - it will sit flush and look great on most 510-threaded mods. It comes with a non-removable delrin mouthpiece.
The Aspire Nautilus X is designed to provide a hassle-free vaping experience, with a focus on premium flavor from your e-juice. If you are a mouth-to-lung vaper, and prefer compact micro tanks, you must try the Aspire Nautilus X!
Features:
New U-Tech coil design improves flavor
Quick and Easy Top-fill
Leaf-proof "Cup" Design
Adjustable Airflow Control at the top
Ultra low profile
510 connector
Stainless Steel construction
Pyrex Glass Tank for protection from harsh liquids
Delrin mouthpiece
Capacity is 2 ml
Includes:
1 x Aspire Nautilus X tank (pre-installed with a 1.5 ohm coil / 14-22W range)
1 x extra coil (1.5 ohm / 14-22W range)
1 x spare pyrex glass tube
1 x Packing box to store the tank when not in use
Dimensions: Height 45mm (1.7") / Diameter 22mm (0.86")
