AUTO & MANUAL SPINNERS in STOCK!

Discussion in 'Smokeless Image' started by Imagine, Jan 13, 2013.

Thread Status:
Not open for further replies.
Image has been removed.
URL has been removed.
Email address has been removed.
Media has been removed.
  1. Imagine

    Imagine Forum Supplier ECF Veteran

    Joined:
    Mar 16, 2011
    Location:
    OHIO USA
    Ok so for a long time we said we would not go the Variable Voltage route as it was too advanced. But it seems to now have become an intermediate device and something we should be offering. So now we will be :thumbs:

    Comming this week: The VOLT Spinner! allows you to adjust voltage output from 3.3v ~ 4.8v by spinning the knurled dial at the bottom. Optimun setting for ALL VOLT products is 3.6-3.8 VOLTS. However this will allow you to have more control over your vapor output. Higher Voltages will increase vapor production and increase the tempature of the vapor (CAUTION: can lead to dry hits and burnt taste with VOLT products). Lower Voltages will decrease vapor output and make the vapor cooler.

    They will be available in Manual ONLY (autos are in the testing phase and may be an option in the future).
    They will be available in 650, 900 and 1300 MAH.
    They will be available in the VOLT colors with the smooth rubber finishes.

    Threading is 100% compatible with the VOLT lineup (has inner and outer threading).

    Limited quantities until March.

    These will NOT have the passthrough option the X2 has....and charges will need to be purchased seperately!

    Colors offered:
    Rainbow
    Silver/chrome
    black
    white
    blue
    green
    purple
    copper


    (sky blue, orange, yellow, neon green, red and raspberry comming in March)

    They basically look the same as the X2 without the removable bottom cap.

    Price to be released day of sale*
     
  2. JoAnnW

    JoAnnW Vaping Master Verified Member ECF Veteran

    Supporting member
    Joined:
    Oct 19, 2012
    Location:
    B'more MD
    YIPEE!!!!! YAHOO!!! Best surprise EVER!!! Thanks Imagine!

    Happy Dance! :rickroll:
     
  3. Imagine

    Imagine Forum Supplier ECF Veteran

    Joined:
    Mar 16, 2011
    Location:
    OHIO USA
    :) this was the surpise I was hinting at and its coming early!
     
  4. JoAnnW

    JoAnnW Vaping Master Verified Member ECF Veteran

    Supporting member
    Joined:
    Oct 19, 2012
    Location:
    B'more MD
    I was hoping that was the surprise! You really delivered BIG time!!!

    Oh happy days! :toast:
     
  5. CatLady007

    CatLady007 Ultra Member ECF Veteran

    Joined:
    Jul 19, 2011
    Location:
    FL Panhandle
    Yayy!!!!!!
    Now I can quit dithering...I've been wanting to try one, and did NOT want to deal with another hardware vendor.
     
  6. CGlassford

    CGlassford Senior Member ECF Veteran

    Joined:
    Jul 24, 2011
    Location:
    The Woodlands, TX
    Ok, this makes me feel better about my last order getting lost!! I know what I'm ordering with my vape budget this week!! Woo!! Hoo!!
     
  7. BiXLL

    BiXLL Super Member Verified Member ECF Veteran

    Joined:
    Oct 20, 2012
    Location:
    Beaver Falls, Pa
    Thats great for those interested, but I think I will just stay with my X2s.
     
  8. HOPS

    HOPS Super Member ECF Veteran

    Joined:
    Aug 31, 2012
    As Peter Griffin would say.... FREAKIN SWEET! I was just about to start a thread asking if anyone knew a good vv batt that works with SI products without an adapter. Looks like you answered before I asked! I've discovered that CE3s and X2 Clearos work best for me. However my X2 batt is too "hot" for the CE3s and burns some of my juices, but isn't "hot" enough for my Clearos and I don't get as much vapor... I already have my credit card in hand lol...
     
  9. HOPS

    HOPS Super Member ECF Veteran

    Joined:
    Aug 31, 2012
    Just curious, what voltage are the manual X2 batts? 3.7? Also, will current X2 batt chargers work on the spinners?
     
  10. Imagine

    Imagine Forum Supplier ECF Veteran

    Joined:
    Mar 16, 2011
    Location:
    OHIO USA
    they start off at 4.2 and quickly drop and stay steady at a regulated 3.7 volts.

    No Spinner chargers will be sold seperately.

     
  11. JoAnnW

    JoAnnW Vaping Master Verified Member ECF Veteran

    Supporting member
    Joined:
    Oct 19, 2012
    Location:
    B'more MD
    The X2 spinner will not have the endcap. So the charging usb port on the bottom will be exposed?
     
  12. zipflint

    zipflint Ultra Member Verified Member ECF Veteran

    Joined:
    May 26, 2012
    Location:
    Spartanburg, SC
    I'm bettin' the charger will work like an eGo type charger, where you screw the post-end of the battery itself into the charger.
     
  13. Imagine

    Imagine Forum Supplier ECF Veteran

    Joined:
    Mar 16, 2011
    Location:
    OHIO USA
    there is no charging port on the bottom...there is no passthough option....they will screw into a charger from the top...it is a special charger just for the spinner that will be sold seperately.... the bottom is silver and is what you spinn to get the voltage.

     
  14. Imagine

    Imagine Forum Supplier ECF Veteran

    Joined:
    Mar 16, 2011
    Location:
    OHIO USA
    yep.......
     
  15. zipflint

    zipflint Ultra Member Verified Member ECF Veteran

    Joined:
    May 26, 2012
    Location:
    Spartanburg, SC
    Cool! I've been wanting an excuse to buy another 1300mah battery. I'll hafta wait on orange or yellow though.


     
  16. abracadebra

    abracadebra Vaping Master ECF Veteran

    Joined:
    Oct 19, 2012
    Location:
    Queensland banana bender land of OZ
    imagine will aussies be able to charge vv volt spinner....cause we have different power points..:confused: I feel a no coming:unsure:
     
  17. Imagine

    Imagine Forum Supplier ECF Veteran

    Joined:
    Mar 16, 2011
    Location:
    OHIO USA
    yes the charger has a USB connection...not a wall plug connection ;)
     
  18. Atari

    Atari Reviewer / Blogger Verified Member ECF Veteran

    Joined:
    Jan 25, 2011
    Location:
    Charleston, WV
    LOL finally a VV, now if i could just get the Volt cartos in a Tank instead of having to make my own Id be a happy customer
     
  19. abracadebra

    abracadebra Vaping Master ECF Veteran

    Joined:
    Oct 19, 2012
    Location:
    Queensland banana bender land of OZ
    sweet imagine....I always wanted to try a vv....but just didn't know really what to do...so this is great for me...:blush:
     
  20. opal

    opal Ultra Member Verified Member ECF Veteran

    Joined:
    Oct 3, 2012
    Location:
    The redneck riveara
    ya know.. I didn't even know I wanted a VV battery (which I just mis typed as Vatery) but but.. if it makes the T3 vapor warm.. and there's rainbow-- I'm in! ooooooo and since it's not a passthru.. does it have a snazzy LED on the end for when in use? I'm old but I still like lights and sparkly things.
     
Thread Status:
Not open for further replies.

Share This Page