Baby Beast Problems

[Kate 1234]

I am currently using the smok Baby Beast. I have changed the white top fill as it was getting old. I have cleaned it out as well but the liquid keeps coming from the air flow and now coil is stuck i'm unable to unscrew it, the liquid I am using is quite watered down could that be the reason for the leaking?. Is there anyway to unscrew the coil.

Any Help Would Be Much Appreciated.

 

[Tony80]

Coil is stuck into chimney (top part)?
Remove from base, slide glass off, grip both parts (may need rubber gloves) twist apart. some people say try freezing first. Soak in hot water if it doesn't budge, then try again...coil will be shot after water bath though.

Yes, watery juice will cause leakage...try at least 60% vg

 

[Kate 1234]

Thanks for the reply i will defiantly get new liquid Its attached to the base of the tank i have tried everything to try to get it unscrewed but it wont budge.

 

[Sugar_and_Spice]

Thanks for the reply i will defiantly get new liquid Its attached to the base of the tank i have tried everything to try to get it unscrewed but it wont budge.

As a last resort only.....take a towel and some pliers. Do NOT let the pliers touch the tank directly or it will mar the surface. Only place the pliers on the tank with a towel between them and apply only enough pressure to hold the tank still and turn the tank with the other had. Please be careful as to not damage your tank. Let us know,

 

[Kate 1234]

Yeah i will try the rubber glove then if not i will use this i will let you know how it goes Thank you!