1. UK Vapers: Call to action!! We have an historic opportunity to see the TPD annulled in the UK. Please read this this article to see what you can do to help.
    Dismiss Notice

Best for Dripping?

Discussion in 'Thag Built / The Chuck' started by brouxman, Feb 1, 2010.

Thread Status:
Not open for further replies.
Image has been removed.
URL has been removed.
Email address has been removed.
Media has been removed.
  1. brouxman

    brouxman Senior Member ECF Veteran

    Nov 11, 2009
    Syracuse, NY
    Hey Everybody

    I'm now 2 months experienced with my little chuck (and 2 months free from analogs).

    I've simply been using a 510 atty and dripping each time it gets dry, and I was wondering if there is a better atty (preferrably 510 fitting) for a dripper? The cotton inside still soaks up the drippings and sometimes its a little flooded and sometimes it just doesn't work as good...so I'm just wondering if there is a better atty for the dripper...

    Thanks!!
     
  2. Houdini

    Houdini Ultra Member ECF Veteran

    Jan 12, 2009
    Las Vegas
    Dripping means dripping on the atty directly. Take the cotton out of the cartridge. If you have a two piece cartridge take the part that holds the cotton off and use only the outer piece. IMO the 801 is the best overall atty for dripping. It's all I've used for the 2 weeks I've had my Chuck and I couldn't be happier. Oh, and it's a HV atty from Nhaler.
     
  3. brouxman

    brouxman Senior Member ECF Veteran

    Nov 11, 2009
    Syracuse, NY
    Thanks houdini
    any idea if the 801 fits a 510
    or would i need an adaptor?
     
  4. harpo

    harpo Ultra Member Verified Member ECF Veteran

    Dec 19, 2009
    Yuba City, California
    You need an adapter. Jeff sells them for $6 and you get the 801 and 901 adapter. With both of these you can use any atomizer or cartomizer you like.
     
  5. brouxman

    brouxman Senior Member ECF Veteran

    Nov 11, 2009
    Syracuse, NY
    also
    if you don't mind my asking
    why is the 801 best for dripping
    compared to 510 for example
    thanks again!!
     
  6. harpo

    harpo Ultra Member Verified Member ECF Veteran

    Dec 19, 2009
    Yuba City, California
    I just started using an 801 but it seems it's not as harsh a throat hit as the 510 and the flavor seems better.
     
  7. brouxman

    brouxman Senior Member ECF Veteran

    Nov 11, 2009
    Syracuse, NY
    are there any particular types of attys that are one piece where i can drip into the opening rather than pop the cart off each time i need some more juice?
     
  8. harpo

    harpo Ultra Member Verified Member ECF Veteran

    Dec 19, 2009
    Yuba City, California
    SuperTManufacturing sells brass and stainless Steel tips for the 510, 801 and 901. They're made for dripping.
     
  9. doots

    doots Vaping Master Verified Member ECF Veteran

    Aug 22, 2009
    It just holds a little more juice rather than the 510.
     
  10. doots

    doots Vaping Master Verified Member ECF Veteran

    Aug 22, 2009
    take the filler out of the cart and put the cart back on empty if you want to just drip. it will help keep it from flooding.
     
  11. brouxman

    brouxman Senior Member ECF Veteran

    Nov 11, 2009
    Syracuse, NY
    I took the cotton out and it does help prevent the flooding....

    I did this once before and i ran into the problem of accidental over dripping then getting a mouthful of juice...and i found the cotton helped soak that overdrip up....

    so i guess its 6 in one.... half a dozen.....
     
  12. brouxman

    brouxman Senior Member ECF Veteran

    Nov 11, 2009
    Syracuse, NY

    have you used these?

    I see that you're supposed to use a specific needle-like device for dripping...is that necessary or can you still get away with just dripping from the regular bottle?
     
  13. Houdini

    Houdini Ultra Member ECF Veteran

    Jan 12, 2009
    Las Vegas
    I ordered one. Havn't got it yet. After reading through some posts about it you apparently can drip into it right from the bottle. At least on the 801 version.
     
Thread Status:
Not open for further replies.

Share This Page