By Leo : Attys, mods, Drip-tips, tanks

Discussion in 'Euro Suppliers' started by Billie-cig, Jun 4, 2013.

Image has been removed.
URL has been removed.
Email address has been removed.
Media has been removed.
  1. Billie-cig

    Billie-cig Registered Supplier ECF Veteran

    Joined:
    May 16, 2013
    Location:
    Athens,Greece
    Hello to every vaper in the world!
    We're a a moding company from Greece called By Leo.
    We create tanks, attys, Drip tips, APVs and more! All our products are from stainless steel 303 and 304 and high density plexiglass.
    Some of our products are, THE Dripper, Killer 705 (together with Septero), GV Telescopic tank and the bOd MECHA.
    I will be posting reviews and instructional videos to introduce our products better.
    You can visit our store : www.byLeo.eu
    Find us on Facebook :
    E-mail us byLeogr@gmail.com

    Thank you all for keeping our vaping dreams alive!

    Keep on vapin' !
     
  2. Billie-cig

    Billie-cig Registered Supplier ECF Veteran

    Joined:
    May 16, 2013
    Location:
    Athens,Greece
    Here is a review of THE Dripper
     
  3. Billie-cig

    Billie-cig Registered Supplier ECF Veteran

    Joined:
    May 16, 2013
    Location:
    Athens,Greece
    And a review for the Killer 705 (Septero)
     
  4. Billie-cig

    Billie-cig Registered Supplier ECF Veteran

    Joined:
    May 16, 2013
    Location:
    Athens,Greece
    And an intructional Video for the bOd MECHA
     
  5. Leoleoleo

    Leoleoleo Super Member ECF Veteran

    Joined:
    Mar 6, 2013
    Location:
    Montreal
    The bOd mecha looks INCREDIBLE. I didn't know about the top cap & button until this video. Must find out more.
     
  6. eratikmind

    eratikmind Retired & Squonking It Verified Member ECF Veteran

    Supporting member
    Joined:
    Mar 22, 2013
    Location:
    Las Vegas/San Francisco
    Anxiously awaiting the arrival of my eBaron Dripper Pro.

    - Andy
     
  7. Billie-cig

    Billie-cig Registered Supplier ECF Veteran

    Joined:
    May 16, 2013
    Location:
    Athens,Greece
    Thank you!
    I think it's the first ring-airflow-lock-button-cap of this type.But i'm not sure since the world is so big.Maybe someone else thought of it as well!Tested it for a month before finalizing it.I hope it works for everyone!
     
  8. Billie-cig

    Billie-cig Registered Supplier ECF Veteran

    Joined:
    May 16, 2013
    Location:
    Athens,Greece
    I hope it meets your requirements!
     
  9. Dnerve

    Dnerve Senior Member Verified Member ECF Veteran

    Joined:
    Jan 11, 2013
    Location:
    Ireland
    Welcome! I was wondering how come you guys were not around!

    This is awesome! I was so excited by the MECHA that I did not even notice this supplier's thread!

    I'm a big fan of your products! Sorry but I also created a thread in the APV section so I dunno if appropriate...

    Got a few questions on the MECHA too:

    -What is the outer diameter of the ring?
    -On one of the pics it looks 2 toned, the telescopic part looking matte vs the bOd body while on the other pictures it looks like all is shined.
    -Is the head sold on its own compatible with existing bOd's?
    -In your video you talk about atties with long 510 connectors, what about short ones? I understand the center POST is not adjustable or is it?

    Keep it up!
     
  10. Dnerve

    Dnerve Senior Member Verified Member ECF Veteran

    Joined:
    Jan 11, 2013
    Location:
    Ireland
    I think I figured that one out: The switch is actually the atty's center post that is mobile and gets in contact with the mod's center post when it is pushed down? If that's the case it means that a shorter atty connector would only mean a longer movement of the switch?

    If that's the case, it's simply brilliant!
     
  11. Billie-cig

    Billie-cig Registered Supplier ECF Veteran

    Joined:
    May 16, 2013
    Location:
    Athens,Greece
    Well the outer post is the mobile part but you got the idea correctly!(the outer post is one with the delivery system and the inner post with the battery so you could say it both ways).So i believe ther won't be any problems with any 510 conectors in the market.
    The outer ring's diameter is 24mm.
    It will be two - toned(matte and shined). Some pictures are from the prototype since we didn't have a photoshooting of the final product yet(exept the ones u saw that was from a phone).i will explain it in the store so nothing goes wrong.
    And yes the head is compatible with all bOds.
    Thank you for your kind words!
     
  12. Leoleoleo

    Leoleoleo Super Member ECF Veteran

    Joined:
    Mar 6, 2013
    Location:
    Montreal
    Billie, are there any plans to change the bottom cap?
     
  13. Billie-cig

    Billie-cig Registered Supplier ECF Veteran

    Joined:
    May 16, 2013
    Location:
    Athens,Greece
    Change in which way?Do you have anything in mind?
     
  14. Leoleoleo

    Leoleoleo Super Member ECF Veteran

    Joined:
    Mar 6, 2013
    Location:
    Montreal
    I'm not crazy about the "ecig" engraving. Not a big deal but the bottom cap is the part I would be showing to the world most of the time.
     
  15. Dnerve

    Dnerve Senior Member Verified Member ECF Veteran

    Joined:
    Jan 11, 2013
    Location:
    Ireland
    I totally agree!

    Perhaps matte cap with no logo and matte extension tube (perhaps also a longer to be 18650+kick compatible) as parts for existing bOd owners to build that two-twone. :p
     
  16. Billie-cig

    Billie-cig Registered Supplier ECF Veteran

    Joined:
    May 16, 2013
    Location:
    Athens,Greece
    We first built the bOd for the evic head together with a company called Ecig, that's why we have that logo.Since we reached the number of bOds that we aggreed to have their emblem on, we will soon start producing caps without the "ecig" on.
    You are right i prefer my "toys" to be as clean as possible too :)
    And here is a way to make the bOd take a 18650 battery with a kick.It's an extra telescopic part that will be on sale seperately when the MECHA comes out.(you can do it now if you have 2 bods)This photo is from a working prototype.
    4rbx8h.jpg
     
  17. Leoleoleo

    Leoleoleo Super Member ECF Veteran

    Joined:
    Mar 6, 2013
    Location:
    Montreal
    Thanks Billie. When is the Mecha due to be released? And when can we expect to start seeing some reviews?
     
  18. Billie-cig

    Billie-cig Registered Supplier ECF Veteran

    Joined:
    May 16, 2013
    Location:
    Athens,Greece
    it will be in stock in about a month. I will send some pieces for review shortly before release :vapor:
    And post any review here of course!
     
  19. Billie-cig

    Billie-cig Registered Supplier ECF Veteran

    Joined:
    May 16, 2013
    Location:
    Athens,Greece
    Here are some photos of setups of the bOd MECHA that a friend took when i gave it to him as a test subject!(It's the prototype so it's not two-toned)
     

    Attached Files:

  20. Dnerve

    Dnerve Senior Member Verified Member ECF Veteran

    Joined:
    Jan 11, 2013
    Location:
    Ireland
    Will the matte cap and telescopic bit be available as parts on their own?
     

Share This Page