Catfish Atty Mods the next Chapter

[Chowderhead1972]

NarDa arrived today. Damn good atty. Tried single coil first, but that was a no-go. Dual 29 g for a while, a bit better, .

. now dual 3 twisted 32g. A pita to build. Will take some more tinkering but I think it's a winner![emoji3]
Will post some pics when I get it sorted out

I'm using mine with 31/4 twisted and loving it. You don't choose the Narda.... The Narda chooses you.......... Right Super X?

 

[Chowderhead1972]

Man Tom this Kennedy is sick tons of airflow but not too much and definitely pumps out the vapor without sacrificing the flavor. Any chance you will be getting more of them.

Sent from my LGL33L using Tapatalk

I tried to set up a run of them but it was met with very limited interest. I will do send ins for it though. I do have my demo in stock that I used very briefly.

 

[beez0527]

I tried to set up a run of them but it was met with very limited interest. I will do send ins for it though.

That will work I should be getting another here shortly will let you know when it arrives. I still love my stumpy but this is a very close 2nd. Btw got triple twisted 22g,28g & .08. Flat ribbon at .19ohm

Sent from my LGL33L using Tapatalk

 

[Asbestos4004]

I'm using mine with 31/4 twisted and loving it. You don't choose the Narda.... The Narda chooses you.......... Right Super X?

HAHAHHHAHAHAHAHAHAHHAHAHAHAHAHAHAHAAAAAA!!!!!

 

[Henry Etta]

I should mention the only thing PITA about a twisted 30g build was the fact that the wire is super springy, and my lighter ran out of fluid. The single coil and dual 29g were no problem at all.

 

[penguiness]

Removing myself here to wait for the black Stumpy.

The NarDa 50...( $95 + 6 )
1. distortoblotto
2. distortoblotto
3. jhhollier
4. RickCain
5. hotsauc333
6. 67Tele
7. inswva
8. m3th1dz
9. AllPepperS
10. NatGasMan
11. Harleyndn
12. MFToms59
13. Papa_Lazarou
14. EZinTN
15. bottomfeeder
16. BENTHOS
17. YePsTeR
18. Strongdad
19. rbferg
20. sheishreviews
21. 67Tele
22. hotsauc333
23. turbocad6

 

[Loopy1224]

Catfish/Element mods Stumpy
50 SS on the first run. Black and gold will come a few weeks behind the SS. These will have Element mods/Catfish on the bottom for the first 100 pieces.
This list is SS only. The black and gold lists will be posted as they get closer.
1. penguiness
2. Travisbass
3. Travisbass
4. houndb
5. hotsauc333
6. Kentastic
7. Beez0527
8. TheDigital99
9. jazzvaper
10. pwheeler
11. EZinTN
12. Asbestos
13. rbferg
14. inspects (no drip tip needed)
15. distortoblotto
16. distortoblotto
17. inspects (no drip needed)
18. Rex Everything
19. m3th1dz
20. hotsauc333
21. Loopy1224

 

[unsure]

Medical bills and only authentics have had me staying away but if I can finagle a Christmas present for myself I am interested in either the Stumpy or the NarDa. From just the little reading here it seems the NarDa has a more of a restrictive airflow (which I prefer) than the Stumpy...right?

 

[Headshrink]

Catfish/Element mods Stumpy
50 SS on the first run. Black and gold will come a few weeks behind the SS. These will have Element mods/Catfish on the bottom for the first 100 pieces.
This list is SS only. The black and gold lists will be posted as they get closer.
1. penguiness
2. Travisbass
3. Travisbass
4. houndb
5. hotsauc333
6. Kentastic
7. Beez0527
8. TheDigital99
9. jazzvaper
10. pwheeler
11. EZinTN
12. Asbestos
13. rbferg
14. inspects (no drip tip needed)
15. distortoblotto
16. distortoblotto
17. inspects (no drip needed)
18. Rex Everything
19. m3th1dz
20. hotsauc333
21. Loopy1224

22. Headshrink

 

[puffon]

Catfish/Element Mods Stumpy
50 SS on the first run. Black and gold will come a few weeks behind the SS. These will have Element mods/Catfish on the bottom for the first 100 pieces.
This list is SS only. The black and gold lists will be posted as they get closer.
1. penguiness
2. Travisbass
3. Travisbass
4. houndb
5. hotsauc333
6. Kentastic
7. Beez0527
8. TheDigital99
9. jazzvaper
10. pwheeler
11. EZinTN
12. Asbestos
13. rbferg
14. inspects (no drip tip needed)
15. distortoblotto
16. distortoblotto
17. inspects (no drip needed)
18. Rex Everything
19. m3th1dz
20. hotsauc333
21. Loopy1224
22. Headshrink

 

[TheDigital99]

That will work I should be getting another here shortly will let you know when it arrives. I still love my stumpy but this is a very close 2nd. Btw got triple twisted 22g,28g & .08. Flat ribbon at .19ohm

Sent from my LGL33L using Tapatalk

I have a CatFish Modded Kennedy 22 and its rocking an a Dual 18650 Tmod Right Now.. It would also be a great atty for the Cam-M or LBC... This atty loves power and low ohms

 

[beez0527]

I have a CatFish Modded Kennedy 22 and its rocking an a Dual 18650 Tmod Right Now.. It would also be a great atty for the Cam-M or LBC... This atty loves power and low ohms

I threw it on my tmod to just try out but that is the plan 1for my cam m and the other for the cam r (lbc)

Sent from my LGL33L using Tapatalk

 

[fishwater]

I'm thinking about getting a new Atty for my Cam-M as well, something to handle the lower builds I want to try since it's a dual 18650 mod. I'm thinking my current atty's except for the Mephesto will be too hot. I have a Rogue, Derringer, Mini Velocity, Mephesto & Atomic.

 

[RGLP4Lyfe]

Hey Tom, did you get my email?

 

[Slots]

Adding myself to the list
Catfish/Element Mods Stumpy
50 SS on the first run. Black and gold will come a few weeks behind the SS. These will have Element mods/Catfish on the bottom for the first 100 pieces.
This list is SS only. The black and gold lists will be posted as they get closer.
1. penguiness
2. Travisbass
3. Travisbass
4. houndb
5. hotsauc333
6. Kentastic
7. Beez0527
8. TheDigital99
9. jazzvaper
10. pwheeler
11. EZinTN
12. Asbestos
13. rbferg
14. inspects (no drip tip needed)
15. distortoblotto
16. distortoblotto
17. inspects (no drip needed)
18. Rex Everything
19. m3th1dz
20. hotsauc333
21. Loopy1224
22. Headshrink
23. Slots

 

[jhhollier]

Medical bills and only authentics have had me staying away but if I can finagle a Christmas present for myself I am interested in either the Stumpy or the NarDa. From just the little reading here it seems the NarDa has a more of a restrictive airflow (which I prefer) than the Stumpy...right?

Correct, the NarDA is more restrictive than the Stumpy.

 

[penguiness]

Medical bills and only authentics have had me staying away but if I can finagle a Christmas present for myself I am interested in either the Stumpy or the NarDa. From just the little reading here it seems the NarDa has a more of a restrictive airflow (which I prefer) than the Stumpy...right?

I'm thinking about getting a new Atty for my Cam-M as well, something to handle the lower builds I want to try since it's a dual 18650 mod. I'm thinking my current atty's except for the Mephesto will be too hot. I have a Rogue, Derringer, Mini Velocity, Mephesto & Atomic.

The Stumpy and NarDa both like the flavor crowd, with the NarDa performing a bit better in dual coil mode and lower ohm builds. Single coil builds are a bit easier to get dialed in on the Stumpy. The NarDa can do singles, with a spaced coil doing better than a tight one. Even with the airflow closed all the way, the NarDa still allows some air through. If the NarDa seems a bit noisy to you, push your coil(s) down a bit in the juice wells. That will also keep your tip from getting a bit too hot (the tip that came with the first released batch is a stubby) The NarDa holds a fraction more juice in the wells which is a plus for oversquonkers. You can't go wrong with either atty. In size, the Stumpy is shorter. Hope this info helps.

 

[Chowderhead1972]

Narda is Noisy? It's the quietest atty I have used in a while, that was actually the first long I noticed about it in actual use. The thump was noisy.

 

[RGLP4Lyfe]

Peng- the list above that everyone it's copying and adding to, still has you at the top, they must of been using the list that was before you removed yourself. Just letting you know so you or someone can fix it up right.

I would but my smart phone is not very smart!

@penguiness

 

[Drillerrt]

How can I find more info on the stumpy. Price wise shipment date and more important how do I add myself to the list. Any help would be greatly appreciated.