This post will be a work in progress for some time.
MY STORY
I recently discovered the greatness of The Reo mod and no longer having to put up with dry hits or carrying around bottles for dripping but I noticed as awesome as the Reo and I'm sure other bottom feeders as well there are just not many off the shelf atomizers available. Sure there are Cyclones and Chalices along with a few less known options. What about the vaper that falls in love with a certain atty or atty type and it's not one of the previously mentioned options?
Thats where i come in... I have been modding different atties for my self from the third day I had my first Reo Grand. I started with the RM2 from ReoMods but quickly learned it wasn't for me. First off let me state I have a severe metal taste intolerance so anything other than pure stainless steel is a big "No Go" for me. I can taste brass and I can taste copper in one puff. Suffice to say of the shelf atties that were all stainless have been hard to come by. The Cyclone Bf is nice but very hard to find (I had to order two from France and at an exorbitant price. I started drilling out top fed Cyclones that were plentiful and cheap and mentioned this to a few friends I made along the way and instantly I'm drilling atty after atty every weekend.
After a few not so subtle suggestions from the ECF staff in regards to policy I was invited to become a supplier offline. I resisted at first but after getting more than a few emails from people I had helped along the way as well as others that were interested in becoming future clients.
I really wasn't looking for a second job but I enjoy vaping and after wading through an endless sea of Provari's, Kayfuns, dna this and that I discovered ReoMods and have been completely blown away by both the Reo Grand and the Customer service that "IS" ReoMods. I noticed a weak spot; atty choice is limited to say the least. I hope to be able to fix that.
In the past most of my work has been send in modifications which I will continue to do; clones or originals are no problem. I actually prefer to work on originals due to the higher quality steel but I understand not everyone can afford to modify a $100 plus atomizer. I have recently ordered a few of each atomizer that I know I can make work well on a Bottom Feeder.
Please contact me via PM for any of your atty modification needs or repairs.
I will be posting pics of my current projects as they come up.
The list of possibilities so far:
Vicious Ant Cyclone tf
Madz Modz Reactor v2
Atomic original or clone (must have SS 510 center)
Stillare clone (must have SS 510 center)
Quasar (must have SS 510 center)
Pretty much any 2 or three post dripper with a 510 connector and a SS center pin
Prices start at $15 each for modding sent in atomizers, and shipping for 1-4 atties is $5.80, 5 or more shipping is free.
In the coming weeks I will have pre-modded clones available for immediate shipping but until my first shipment arrives I will be doing send-in only.
I have the following CLONES on order: Zenith v2, EHPro atomic, Trident (all SS), Helios, and Brass Quasars (ss pin and deck). Depending how this works out I will probably keep a back stock of pre-modded Cyclones as well.
The clones will be $45 with free shipping pre-modded
The Cyclones pre-modded will be $58 with free shipping
The Cyclones w/AFC modded will be $80 or Gold AFC $95
Please pm or post ideas, suggestions, and or feedback.
**All Atties modded will be center bored and cross drilled**
No Swiss cheesed bushings here!
MY STORY
I recently discovered the greatness of The Reo mod and no longer having to put up with dry hits or carrying around bottles for dripping but I noticed as awesome as the Reo and I'm sure other bottom feeders as well there are just not many off the shelf atomizers available. Sure there are Cyclones and Chalices along with a few less known options. What about the vaper that falls in love with a certain atty or atty type and it's not one of the previously mentioned options?
Thats where i come in... I have been modding different atties for my self from the third day I had my first Reo Grand. I started with the RM2 from ReoMods but quickly learned it wasn't for me. First off let me state I have a severe metal taste intolerance so anything other than pure stainless steel is a big "No Go" for me. I can taste brass and I can taste copper in one puff. Suffice to say of the shelf atties that were all stainless have been hard to come by. The Cyclone Bf is nice but very hard to find (I had to order two from France and at an exorbitant price. I started drilling out top fed Cyclones that were plentiful and cheap and mentioned this to a few friends I made along the way and instantly I'm drilling atty after atty every weekend.
After a few not so subtle suggestions from the ECF staff in regards to policy I was invited to become a supplier offline. I resisted at first but after getting more than a few emails from people I had helped along the way as well as others that were interested in becoming future clients.
I really wasn't looking for a second job but I enjoy vaping and after wading through an endless sea of Provari's, Kayfuns, dna this and that I discovered ReoMods and have been completely blown away by both the Reo Grand and the Customer service that "IS" ReoMods. I noticed a weak spot; atty choice is limited to say the least. I hope to be able to fix that.
In the past most of my work has been send in modifications which I will continue to do; clones or originals are no problem. I actually prefer to work on originals due to the higher quality steel but I understand not everyone can afford to modify a $100 plus atomizer. I have recently ordered a few of each atomizer that I know I can make work well on a Bottom Feeder.
Please contact me via PM for any of your atty modification needs or repairs.
I will be posting pics of my current projects as they come up.
The list of possibilities so far:
Vicious Ant Cyclone tf
Madz Modz Reactor v2
Atomic original or clone (must have SS 510 center)
Stillare clone (must have SS 510 center)
Quasar (must have SS 510 center)
Pretty much any 2 or three post dripper with a 510 connector and a SS center pin
Prices start at $15 each for modding sent in atomizers, and shipping for 1-4 atties is $5.80, 5 or more shipping is free.
In the coming weeks I will have pre-modded clones available for immediate shipping but until my first shipment arrives I will be doing send-in only.
I have the following CLONES on order: Zenith v2, EHPro atomic, Trident (all SS), Helios, and Brass Quasars (ss pin and deck). Depending how this works out I will probably keep a back stock of pre-modded Cyclones as well.
The clones will be $45 with free shipping pre-modded
The Cyclones pre-modded will be $58 with free shipping
The Cyclones w/AFC modded will be $80 or Gold AFC $95
Please pm or post ideas, suggestions, and or feedback.
**All Atties modded will be center bored and cross drilled**
No Swiss cheesed bushings here!
Last edited: