Ecig working but not producing and vapour

[Danny Shipley]

I have a 1500mah evod and i let my mate use it , he for some reason put the isub apex on it which pushed the pin down alot which made it not read normal atomisers.
I lifted it up with a screwdriver but it still doesnt work.
Anyone know how to fix it?

 

[Susan~S]

What is the resistance of the coil that was in the Apex when your mate tried it on your Evod. Did the Evod work with that coil?

Most evods will not fire if you have a coil below 1.5Ω. But if the protection circuitry is not working (and you are using a coil that is too low) it is possible the that circuits have been fried.

 

[Danny Shipley]

What is the resistance of the coil that was in the Apex when your mate tried it on your Evod. Did the Evod work with that coil?

The coil was a 0.5ohm and it worked fine surprisingly
He only used it for about 30 seconds before i made him take it off

 

[Baditude]

Will any other juice attachment work on the Evod, or is the battery "dead"?

According to innokin, "The iSub Apex is compatible with all 2.0Ω, 0.5Ω and 0.2Ω iSub coils which are made with high quality 100% Japanese organic cotton for fast wicking and pure flavors."

Theoretically, the Evod should have been able to fire a 2 ohm coil, but not a 0.5 ohm or 0.2 ohm coil.

It's possible that you ruined the electrical connection between the 510 center pin to the battery when you attempted the pin adjustment. I doubt that firing the sub-ohm coil ruined the battery, as it has protection circuitry.

 

[Danny Shipley]

Will any other juice attachment work on the Evod, or is the battery "dead"?

According to Innokin, "The iSub Apex is compatible with all 2.0Ω, 0.5Ω and 0.2Ω iSub Coils which are made with high quality 100% Japanese organic cotton for fast wicking and pure flavors."

Theoretically, the Evod should have been able to fire a 2 ohm coil, but not a 0.5 ohm or 0.2 ohm coil.

It's possible that you ruined the electrical connection between the 510 center pin to the battery when you attempted the pin adjustment. I doubt that firing the sub-ohm coil ruined the battery, as it has protection circuitry.

Batterys dead