ego c twist with a pro tank?

Discussion in 'New Members Forum' started by Mack813, May 14, 2013.

Thread Status:
Not open for further replies.
Image has been removed.
URL has been removed.
Email address has been removed.
Media has been removed.
  1. Mack813

    Mack813 Senior Member ECF Veteran

    Joined:
    May 11, 2013
    Location:
    florida
    is this a good combo? anybody out there with this setup?
     
  2. Dakota Jim

    Dakota Jim Ultra Member Verified Member ECF Veteran

    Joined:
    Apr 14, 2013
    Location:
    in a warehouse buried near Univille SD
    should work fine as you can up the voltage to get the right flavor with 2.4 (??? I think they come with 2.4 ohm heads) - do be careful as it will be a little top heavy and fall over (don't want it to break)
     
  3. NGAHaze

    NGAHaze Infinity Member Verified Member ECF Veteran

    Supporting member
    Joined:
    Dec 13, 2010
    Location:
    Georgia
    Sure, that will work. It's a little top heavy so you have to be careful but it should work fine.
     
  4. Mack813

    Mack813 Senior Member ECF Veteran

    Joined:
    May 11, 2013
    Location:
    florida
    thanks for the replies... im really looking forward to this being my setup...
     
  5. BostLabs

    BostLabs Super Member Verified Member ECF Veteran

    Joined:
    Apr 13, 2013
    Location:
    Phoenix, AZ. USA
    It works, but it is really airy. I think I saw some sort of skirt for the ego that you can get that would take care of that though.
    I can't get to photobucket here from work, but I have pic of this setup there. I'll post a pic when I get home.
     
  6. Lafingriot

    Lafingriot Senior Member ECF Veteran

    Joined:
    Apr 12, 2013
    Location:
    Kempton, PA
    Love the setup (look at my avatar) it's sleek, sturdy, always works. On a 1000 mah twist is 7 1/4in long. On the 650 it's 6.5in long which is much more pocketable
     
  7. BostLabs

    BostLabs Super Member Verified Member ECF Veteran

    Joined:
    Apr 13, 2013
    Location:
    Phoenix, AZ. USA
    Yes Lafingriot has those skirts I was talking about. I'll bet it knocks down the airiness big time just like the skirt on my eVic does.

    Where can one get those Lafingriot?
     
  8. Dvx67

    Dvx67 Super Member Verified Member ECF Veteran

    Joined:
    Mar 23, 2013
    Location:
    Lexington, KY
    It works just fine. The ProTank comes with the skirt. All you need is the battery.
     
  9. Dvx67

    Dvx67 Super Member Verified Member ECF Veteran

    Joined:
    Mar 23, 2013
    Location:
    Lexington, KY
  10. BostLabs

    BostLabs Super Member Verified Member ECF Veteran

    Joined:
    Apr 13, 2013
    Location:
    Phoenix, AZ. USA
    hmmm... Mine didn't but my guys had to do some change out on the ProTank for the eVic at the store. Maybe I have them and have put there away for safe keeping which is a code word for "Lost forever!" :)
     
  11. Dvx67

    Dvx67 Super Member Verified Member ECF Veteran

    Joined:
    Mar 23, 2013
    Location:
    Lexington, KY
    It should have come with the case and skirt as pictured in the link I posted. If they didn't give these to you I would go back and talk to them.
     
  12. Mack813

    Mack813 Senior Member ECF Veteran

    Joined:
    May 11, 2013
    Location:
    florida
    appreciate the help guys!!!!
     
  13. Mack813

    Mack813 Senior Member ECF Veteran

    Joined:
    May 11, 2013
    Location:
    florida
    lafringot however you spell it could you send me a pic of that setup please?
     
  14. puchox

    puchox Super Member Verified Member ECF Veteran

    Joined:
    May 2, 2013
    Location:
    Montevideo, Uruguay
    According to my courier tracking i should get 2 protanks and an 2 eGo C pass throughs (bought them for my "afk vape" :p) tomorrow, ill post pictures and impressions for you :)
     
  15. Lafingriot

    Lafingriot Senior Member ECF Veteran

    Joined:
    Apr 12, 2013
    Location:
    Kempton, PA
    image.jpg
    3 twists w protanks. The black ones are 650 and the silver is a 1000 mah
    image.jpg
    Protank against a mini metal vivi nova, ego vision, standard ego tank
     
  16. vang0gh

    vang0gh Super Member Verified Member ECF Veteran

    Joined:
    May 5, 2013
    Location:
    Plainfield, IL, USA
    The pro tank works well on my vision spinners. So, it should be just fine on an ego twist. It's a little top heavy on the smaller ego batteries, but nothing that's unmanageable.
     
  17. Mackhaio5

    Mackhaio5 Senior Member Verified Member ECF Veteran

    Joined:
    Mar 27, 2013
    Location:
    Huntington Beach, CA
    Be careful with tipping. I broke 1 of my protanks when it tipped on my evic
     
  18. BostLabs

    BostLabs Super Member Verified Member ECF Veteran

    Joined:
    Apr 13, 2013
    Location:
    Phoenix, AZ. USA
    Looks pretty silly without the cone. :)
    [​IMG]
     
  19. Ropav

    Ropav Senior Member Verified Member ECF Veteran

    Joined:
    May 11, 2013
    Location:
    The moon
    i have one on a VV and it works good
     
  20. Hidden Dragon

    Hidden Dragon Senior Member Verified Member ECF Veteran

    Joined:
    Feb 27, 2013
    Location:
    Maryland
    Like others have stated, a little top heavy but it works just fine on a twist.
     
: evic, evod, protank
Thread Status:
Not open for further replies.

Share This Page