EGO Threads?

Discussion in 'ProVari' started by Leithan, Jul 26, 2013.

Thread Status:
Not open for further replies.
Image has been removed.
URL has been removed.
Email address has been removed.
Media has been removed.
  1. Leithan

    Leithan Just a "Member" Verified Member ECF Veteran

    Supporting member
    Joined:
    May 19, 2013
    Location:
    Fort Irwin
    I think I'm missing something here, I keep seeing lack of EGO threads being mentioned as a strike against the Provari. Is there some magical vape device that only has EGO threads that I have some how never heard about? Do people really contemplate spending $150 on a mod and then get upset because they can't use a $2 dollar device on it? Maybe I'm missing something, but when I started with EGO's I don't remember their being any EGO threaded devices that worked all that great. I guess I assume the people moving up to a higher end mod would also be upgrading their vape devices as well. I was going to post this in the general, but you all know how most Provari posts end up. I have a bunch of Cleros, but they go on twists, Iv never been upset that I cant run them on my provari.
     
  2. Susan W.

    Susan W. Provarinati in fideliam ☆ Verified Member ECF Veteran

    Supporting member
    Joined:
    Apr 30, 2013
    Location:
    Torrance, CA
    You need a 510 to eGo adapter to use an eGo clearo on a Provari. It's $2.49 from Mad Vapes.
     
  3. Susan W.

    Susan W. Provarinati in fideliam ☆ Verified Member ECF Veteran

    Supporting member
    Joined:
    Apr 30, 2013
    Location:
    Torrance, CA
    I don't see it as a strike again Provari. 510 threading was around prior to eGo threading so there's more options as far as delivery systems using 510 threading.
     
  4. Thrasher

    Thrasher Vaping Master Verified Member ECF Veteran

    Joined:
    Oct 28, 2012
    Location:
    Madeira beach, Fla
    i for one am bent i cant use a ce4 on it, after spending all that money its all i can afford now :D
     
  5. kas122461

    kas122461 Ultra Member ECF Veteran

    Joined:
    Jun 15, 2013
    Location:
    Indiana, USA
    Seriously?


     
  6. Leithan

    Leithan Just a "Member" Verified Member ECF Veteran

    Supporting member
    Joined:
    May 19, 2013
    Location:
    Fort Irwin
    That's a valid reason I hadn't thought about:D
     
  7. Susan W.

    Susan W. Provarinati in fideliam ☆ Verified Member ECF Veteran

    Supporting member
    Joined:
    Apr 30, 2013
    Location:
    Torrance, CA
    Well, I "wish" all equipment is compatible with each other but that's not the way it is. Yeah, it's a bummer that if I want to use cartos I have to buy the right size ones to fit the tanks I already have. The best plan is to make sure you've saved up enough before making expensive purchases so you can afford a $2.49 adapter.
     
  8. vang0gh

    vang0gh Super Member Verified Member ECF Veteran

    Joined:
    May 5, 2013
    Location:
    Plainfield, IL, USA
    The Evod is a nice little ego only threaded clearo. But, it's really irrelevant since adapters are available if you're determined to pair it up with Provari. Also, someone pointed out that a Protank base can be put on an Evod to make it 510 threaded if you're desperate.
     
  9. Leithan

    Leithan Just a "Member" Verified Member ECF Veteran

    Supporting member
    Joined:
    May 19, 2013
    Location:
    Fort Irwin
    No seriously...............
    not really .
    Did the post sound snobbish?
    Mostly I was board and not feeling all that serious.
    Is there some really Bad *** device that uses ego threads?
    Is EGO versus 510 a touchy subject? Like VHS vs Beta max, Blue Ray vs HD DVD, Coke vs Pepsi?
    But no, not seriously, well sort of. I just read in a post, (not about Provari) it was about another high end mod, it listed all these great features yadyada and the first reply was "It's cool, but it doesn't have EGO threading" and I just can't help thinking..............so what. I don't understand it as I have never really been attached to a Ego threaded device.
     
  10. The Ocelot

    The Ocelot Mystagogue φ Verified Member ECF Veteran

    Supporting member
    Joined:
    Aug 12, 2012
    Location:
    The Clock Barrens, Fillory
    I don't care about VW, but if ProVape added eGo threading I would be all over it!
     
  11. kas122461

    kas122461 Ultra Member ECF Veteran

    Joined:
    Jun 15, 2013
    Location:
    Indiana, USA
    I have a few ego threaded items, that I have not used for 2 months, I doubt if I will use them again anytime soon.
     
  12. Leithan

    Leithan Just a "Member" Verified Member ECF Veteran

    Supporting member
    Joined:
    May 19, 2013
    Location:
    Fort Irwin
  13. BlueMoods

    BlueMoods Ultra Member Verified Member ECF Veteran

    Joined:
    Aug 19, 2010
    Location:
    USA - Arkansas
    They did.

    Ego-T Adapter
     
  14. Thrasher

    Thrasher Vaping Master Verified Member ECF Veteran

    Joined:
    Oct 28, 2012
    Location:
    Madeira beach, Fla
  15. The Ocelot

    The Ocelot Mystagogue φ Verified Member ECF Veteran

    Supporting member
    Joined:
    Aug 12, 2012
    Location:
    The Clock Barrens, Fillory
    Never mind. It was something else.
     
  16. Leithan

    Leithan Just a "Member" Verified Member ECF Veteran

    Supporting member
    Joined:
    May 19, 2013
    Location:
    Fort Irwin
    You always hear the jokes about how Phallic some Tube Mods look.........I think the V9 is the first mod intentionally made that way. How do you think they sold the design. You think any market research was conducted before they went ahead with production? I wonder what the focus group was like..........." Ok laddies, we have here three items, please pick the one out you would most likely put in your mouth............" You would think at some point some one would of taken a step back and went "hey wait! this thing looks like a Johnson!" I wonder if these are all the rage in China. I hope we are not seeing the forerunner of a new design trend in Chinese made mods....I wonder what the Vamo V4 will look like.
    Oh jeez, it's catching on.......it's even called the "Swordsman", check out it's extended configuration.
    $18.84 Swordsman Telescoping Electronic Cigarette Battery Compartment - pink at FastTech - Worldwide Free Shipping
     
  17. The Ocelot

    The Ocelot Mystagogue φ Verified Member ECF Veteran

    Supporting member
    Joined:
    Aug 12, 2012
    Location:
    The Clock Barrens, Fillory
    I think the Tesla would have scored higher with your focus group...

    [​IMG]
     
  18. Leithan

    Leithan Just a "Member" Verified Member ECF Veteran

    Supporting member
    Joined:
    May 19, 2013
    Location:
    Fort Irwin
    The Tesla is bad......but I still think it could be mistaken for a electric tooth brush.
     
  19. The Ocelot

    The Ocelot Mystagogue φ Verified Member ECF Veteran

    Supporting member
    Joined:
    Aug 12, 2012
    Location:
    The Clock Barrens, Fillory
    It takes a real man to suck on a Tesla.
     
  20. dr g

    dr g Vaping Master Verified Member ECF Veteran

    Joined:
    Mar 12, 2012
    Location:
    Paradise
    The answer is pretty much the EVOD and other kanger Ego devices. Those are IMO some of the best devices you can get and they will handle everything an APV can throw at it. You can even go subohm on them. The Protank exists because of the lack of an ego thread on many APVs.

    Personally I am a fan of the Ego thread even on full size APVs, I like the security and strength of the larger threads. Absolutely not a dealbreaker though.
     
Thread Status:
Not open for further replies.

Share This Page