eleaf istick Pico Mega TC80W Express Kit in Silver
The Eleaf iStick Pico Mega is the latest version of the tiny Eleaf iStick Pico. Although bigger than the original Pico, the Pico Mega also packs a ton of power and features in a small package. The most unique feature of this tiny beast of a mod is that it can be powered by either a single 18650 or 26650 battery.
The iStick Pico Mega is a Variable Wattage and Temperature Control mod. In Variable Wattage mode, the Eleaf iStick Pico Mega has 80 watt maximum output. You can easily upgrade to 100W by installing the latest firmware at the manufacturer's official website here (scroll to the bottom of the page). In temperature mode, you can adjust between 200-600 degrees Fahrenheit (or 100-315 degrees Celsius), and can support the use of Nickel (Ni200), Titanium (Ti), and Stainless Steel (SS316) wires. You can also dial in a custom TCR (Temperature Coefficient of Resistance) setting for other types of coil wires, such as NiFe, SS303 and others. The included manual features a helpful TCR vale range chart to help you find the ideal temperature range for your wire material. If you enjoy using rebuildable atomizers on mechanical mods, you can set the iStick Pico Mega to Bypass mode to harness the full voltage output of your battery. A new Smart mode makes operation easy and allows for a custom logo.
The iStick Pico Mega can accommodate atomizers with a diameter up to 22mm. It will work great with atomizers like the Aspire Cleito, Aspire Nautilus X, Joyetech Cubis, and many others.
The iStick Pico Mega does not come with a built-in battery. Instead, it offers the convenience of a user-replaceable battery (not included), so you can quickly swap out a drained battery for a freshly charged one as needed. The Pico Mega may be used with a single flat top IMR18650 High Drain battery (rated at 25A minimum) with the included removable battery sleeve (pre-installed inside the device). For a long-lasting vape, you may choose to use a single flat top IMR26650 High Drain battery (rated at 35A minimum). Please note that the 26650 battery we offer through the Make it a Kit menu above is rated at 32A, and may be used safely without issue with coil resistances all the way down to 0.2 ohm.
The battery is easily accessible by unscrewing the protruding cap on top of the iStick Pico Mega. Venting holes on the bottom of the mod help with heat dissipation. You can charge your battery with on-board charging, by plugging the included Micro USB charge cable into the USB port on the bottom of the device and then into a computer. However, we recommend charging the battery separately with an appropriate charger, as it will charge much quicker.
The iStick Pico Mega is small and ergonomic, with rounded edges and a no-slip matte surface for a comfortable hand feel. The Pico Mega has a spring-loaded 510 connection pin, a bright, easy-to-read OLED screen, a large firing button on the side, and recessed adjustment buttons on the bottom. Because the iStick Pico Mega is firmware upgradeable, it means this device will remain relevant in your collection for a long time.
The Eleaf iStick Pico Mega is small, user-friendly, feature-rich and extremely versatile. The device comes with all standard protections. The ability to choose between using an 18650 or 26650 battery makes this device unique among its peers. This is a great mod to take on the go, because of its small form factor and removable battery. The iStick Pico Mega has a lot to offer to both intermediate and veteran vapers, whether you enjoy sub ohm, above ohm, temperature control or all three types of vaping.
The Eleaf iStick Pico Mega Express Kit Includes:
1 x iStick Pico Mega mod (High Drain Battery not included - use the Make it a Kit menu to get some at a discount)
1 x Micro USB charge cable
1 x User Manual
1 x Nice display box to keep in when not in use
For a full list of features, please click here.
The Eleaf iStick Pico Mega is the latest version of the tiny Eleaf iStick Pico. Although bigger than the original Pico, the Pico Mega also packs a ton of power and features in a small package. The most unique feature of this tiny beast of a mod is that it can be powered by either a single 18650 or 26650 battery.
The iStick Pico Mega is a Variable Wattage and Temperature Control mod. In Variable Wattage mode, the Eleaf iStick Pico Mega has 80 watt maximum output. You can easily upgrade to 100W by installing the latest firmware at the manufacturer's official website here (scroll to the bottom of the page). In temperature mode, you can adjust between 200-600 degrees Fahrenheit (or 100-315 degrees Celsius), and can support the use of Nickel (Ni200), Titanium (Ti), and Stainless Steel (SS316) wires. You can also dial in a custom TCR (Temperature Coefficient of Resistance) setting for other types of coil wires, such as NiFe, SS303 and others. The included manual features a helpful TCR vale range chart to help you find the ideal temperature range for your wire material. If you enjoy using rebuildable atomizers on mechanical mods, you can set the iStick Pico Mega to Bypass mode to harness the full voltage output of your battery. A new Smart mode makes operation easy and allows for a custom logo.
The iStick Pico Mega can accommodate atomizers with a diameter up to 22mm. It will work great with atomizers like the Aspire Cleito, Aspire Nautilus X, Joyetech Cubis, and many others.
The iStick Pico Mega does not come with a built-in battery. Instead, it offers the convenience of a user-replaceable battery (not included), so you can quickly swap out a drained battery for a freshly charged one as needed. The Pico Mega may be used with a single flat top IMR18650 High Drain battery (rated at 25A minimum) with the included removable battery sleeve (pre-installed inside the device). For a long-lasting vape, you may choose to use a single flat top IMR26650 High Drain battery (rated at 35A minimum). Please note that the 26650 battery we offer through the Make it a Kit menu above is rated at 32A, and may be used safely without issue with coil resistances all the way down to 0.2 ohm.
The battery is easily accessible by unscrewing the protruding cap on top of the iStick Pico Mega. Venting holes on the bottom of the mod help with heat dissipation. You can charge your battery with on-board charging, by plugging the included Micro USB charge cable into the USB port on the bottom of the device and then into a computer. However, we recommend charging the battery separately with an appropriate charger, as it will charge much quicker.
The iStick Pico Mega is small and ergonomic, with rounded edges and a no-slip matte surface for a comfortable hand feel. The Pico Mega has a spring-loaded 510 connection pin, a bright, easy-to-read OLED screen, a large firing button on the side, and recessed adjustment buttons on the bottom. Because the iStick Pico Mega is firmware upgradeable, it means this device will remain relevant in your collection for a long time.
The Eleaf iStick Pico Mega is small, user-friendly, feature-rich and extremely versatile. The device comes with all standard protections. The ability to choose between using an 18650 or 26650 battery makes this device unique among its peers. This is a great mod to take on the go, because of its small form factor and removable battery. The iStick Pico Mega has a lot to offer to both intermediate and veteran vapers, whether you enjoy sub ohm, above ohm, temperature control or all three types of vaping.
The Eleaf iStick Pico Mega Express Kit Includes:
1 x iStick Pico Mega mod (High Drain Battery not included - use the Make it a Kit menu to get some at a discount)
1 x Micro USB charge cable
1 x User Manual
1 x Nice display box to keep in when not in use
For a full list of features, please click here.
