eleaf istick TC60W, Variable Watt/Temperature Control APV (body only) in Black
The latest addition to the popular istick series, the Eleaf iStick TC60W is a Variable Wattage and Temperature Control mod.
A main benefit of Temperature Control is the ability to avoid burnt or "dry hits" while vaping - this can result from over-heating the coil, or from heating a coil that is dry, due to a low e-liquid level inside the atomizer. In temperature mode, the iStick TC60W allows you to adjust between 200-600 degrees Fahrenheit (or 100-315 degrees Celsius), and can support the use of Nickel (Ni200) and Titanium wire. In Variable Wattage mode, this mod has a 60 watt maximum output.
Another great feature of the iStick TC60W is that it does not come with a built-in battery. Instead, it offers the convenience of a user-replaceable battery, so you can quickly swap out a drained battery for a freshly charged one as needed. This latest iStick sports a new look for this series: atomizers mount at the center top of the device, rather than at one end along the top. The iStick TC60W retains all the key features that make iSticks so popular with vapers: a small size, an ergonomic design with rounded edges, and user-friendly operation.
The Eleaf iStick TC60W mod is a great, budget-friendly introduction to Temperature Control vaping. The side and shape of this device make it very comfortable in the hand. And, with a removable battery, it means you never have to wait for your battery to charge - just swap out a drained battery for a freshly-charged one and keep on vaping! The iStick TC60W mod features all standard protections like Short Circuit, Low Voltage, and more.
Eleaf iStick TC60W Features:
Size: Length 90mm (3.54") / Width 38mm (1.49") / Diameter ~26mm (1.02")
The latest addition to the popular istick series, the Eleaf iStick TC60W is a Variable Wattage and Temperature Control mod.
A main benefit of Temperature Control is the ability to avoid burnt or "dry hits" while vaping - this can result from over-heating the coil, or from heating a coil that is dry, due to a low e-liquid level inside the atomizer. In temperature mode, the iStick TC60W allows you to adjust between 200-600 degrees Fahrenheit (or 100-315 degrees Celsius), and can support the use of Nickel (Ni200) and Titanium wire. In Variable Wattage mode, this mod has a 60 watt maximum output.
Another great feature of the iStick TC60W is that it does not come with a built-in battery. Instead, it offers the convenience of a user-replaceable battery, so you can quickly swap out a drained battery for a freshly charged one as needed. This latest iStick sports a new look for this series: atomizers mount at the center top of the device, rather than at one end along the top. The iStick TC60W retains all the key features that make iSticks so popular with vapers: a small size, an ergonomic design with rounded edges, and user-friendly operation.
The Eleaf iStick TC60W mod is a great, budget-friendly introduction to Temperature Control vaping. The side and shape of this device make it very comfortable in the hand. And, with a removable battery, it means you never have to wait for your battery to charge - just swap out a drained battery for a freshly-charged one and keep on vaping! The iStick TC60W mod features all standard protections like Short Circuit, Low Voltage, and more.
Eleaf iStick TC60W Features:
- 5-Click the Power button to turn unit ON/OFF
- Long-press the Menu button to switch between Variable Wattage and Temperature Control (TC-Ni or TC-Ti) Mode
- Variable Wattage: from 1.0 - 60.0 W in 0.1 watt increments
- Temperature Control: from 200 - 600 degrees Fahrenheit (or 100 - 315 degrees Celsius)
- Minimum/Maximum Atomizer Resistance: In Variable Wattage mode - 0.15 ohm - 3.5 ohm. In Temperature Control mode - 0.05 ohm - 1.0 ohm.
- Stealth Mode: Vape with the OLED screen off. To turn Stealth mode ON/OFF, press the Power button and downside of the Adjustment button simultaneously when the device is shut off.
- Adjustment Button Lock: Lock your wattage setting while in Variable Wattage mode to prevent accidental changes. To Lock/Unlock, press the upside and downside of the Adjustment button - the screen will display "Lock" or "Unlock".
- Atomizer Resistance Lock: Lock in the atomizer resistance in Temperature Control mode. Press the Power button and the upside of the Adjustment button simultaneously for 2 seconds to Lock/Unlock the atomizer "base resistance". When Locked, a symbol of a small lock will display next to the atomizer resistance on the OLED screen. When Unlocked, an ohm sign will display instead. Please note: Make sure the coil is at room temperature before Locking it to ensure the device reads the correct resistance.
- Switch OLED Screen Orientation: Rotate the OLED screen display 180 degrees. Press the upside and downside of the Adjustment button simultaneously when the device is shut off.
- 10-second Safety Cutoff: Pressing the Power button for more than 10 seconds will cause the device to shut off. The OLED screen will display "Over 10s".
- Short Circuit Protection: If an atomizer short occurs, the OLED will display "Atomizer Short".
- No Atomizer Protection: If the attached atomizer is not making a proper connection with the device, the OLED screen will display "No Atomizer". Verify that your atomizer is screwed onto the device properly.
- Low Voltage Protection: If battery voltage falls below 3.3V, the OLED screen will display "Lock". Charge the battery to unlock the device.
- Temperature Protection: In TC-Ni and TC-Ti mode, if the actual temperature of the coil is higher than the set temperature, the OLED screen will display "Temp Protection".
- Temperature Alert: If the device overheats past the alert temperature, the output will shut off automatically and the screen will display "Device Too Hot". Set the iStick aside and allow to cool down completely before continuing use.
Size: Length 90mm (3.54") / Width 38mm (1.49") / Diameter ~26mm (1.02")
