ERA - easy rebuildable atomzier

[jun0felix]

dear Reonauti, yesterday i saw an rebuildable bottomfeed atty - the ERA from the Philippines. now to get one, there are buyer lists, but as you can imagine, i am all alone in Switzerland. does anybody know about a list here in ECF i could join?

here's the ERA on Log in | Facebook

*edit by RF
Here's some step by step graciously dropped by urquidezj ....
http://www.e-cigarette-forum.com/fo...easy-rebuildable-atomzier-13.html#post7030028

And a parts list courtesy of MXBNW and everyone else who has contributed to this thread.
http://www.e-cigarette-forum.com/fo...easy-rebuildable-atomzier-39.html#post7319130

Orings courtesy of Colt45: http://www.e-cigarette-forum.com/fo...easy-rebuildable-atomzier-61.html#post7405940

 

[nerak]

Here is the co-op forum, but I didn't see it listed. http://www.e-cigarette-forum.com/forum/coops/

 

[pmoraldo]

the facebook group buy is the only way to acquire 1 at this time and the first round should be shipping out soon so from what they said they should be starting the 2nd round at any time

 

[b-effe]

Hi @jun0felix

you can join this one

The ERA Group Buy

it's in Italy, probably near than USA to Swiss

i'm there too (same name)

if I can help you just tell me

andrea

 

[jun0felix]

thanks everybody for helping me - the Reotribe rules

 

[ltrainer]

How much does this rebuildable cost?

 

[jun0felix]

Top feed ERA Stainless Steel - USD55.00
Top Feed ERA Torched - USD55.00
Bottom Feed ERA Stainless Steel - USD55.00
Bottom Feed ERA Torched - USD55.00
Bamboo Drip Tip - USD15.00
Extra Top Cap (Stainless Steel or Torched) USD 22.00

@ Itrainer: i got this from Mel Timtiman from esigarettaforum.com

 

[urquidezj]

I got one on the way will post some pics when I get it. Seems like there hardly any good pics. I have been wanting to machine one for a reo for quite some time now, let's see how this stacks up. Here is a pic of one of my rebuild able I made in October, seems suspiciously the same lol

 

[house mouse]

I got one on the way will post some pics when I get it. Seems like there hardly any good pics. I have been wanting to machine one for a reo for quite some time now, let's see how this stacks up. Here is a pic of one of my rebuild able I made in October, seems suspiciously the same lol

Did you look at the facebook link in the first post? There's several pictures there.

 

[urquidezj]

Yeah u saw em that why I noticed it looks like what I did it should function extremely well

 

[ltrainer]

Thanks for the info.

Top feed ERA Stainless Steel - USD55.00
Top Feed ERA Torched - USD55.00
Bottom Feed ERA Stainless Steel - USD55.00
Bottom Feed ERA Torched - USD55.00
Bamboo Drip Tip - USD15.00
Extra Top Cap (Stainless Steel or Torched) USD 22.00

@ Itrainer: i got this from Mel Timtiman from esigarettaforum.com

 

[Xaria]

Hope I am not too late to this party. Joined the FB group and sent my info. The photos and videos with the REOs and ERAs was amazing.


Sent from my iPad using Tapatalk HD

 

[TennDave]

Since we are on this topic, I thought I would post a question.
I got in on the group buy for the ERA... I know it comes with wire and silica rope....all good!
However, I see that 4 loops around the wick makes an LR atty (around 1.5ohms).
I'm gonna use this atty on my VV Woodvil hopefully or my kicked 18490 so I need it to be higher ohms...hopefully 2.3~2.5.
What wire do I need to purchase for this, or can I just try to make more loops? I gonna it's gonna be tight if I attempt 5 or 6 loops which I'm not sure is truly achievable without the wires touching each other, which will lower the resistance...

Maybe MX or others with more experience can help answer my question??

 

[jun0felix]

@ TennDave: the thinner the wire the higher the resistance. with an 0,16 or 0,15 wire (instead of the normally used 0,2) you should get about 2.2 ohm easy with 4 wraps

the wires touching themselves is not such an issue ...

 

[urquidezj]

like juno said, add more wraps, i do around 5 or six wraps with 3mm wick and land in the 2.5-3 ohm area.

 

[Mudflap]

Dave, 34 AWG or 36 AWG kanthal A-1 should put you in the neighborhood of the resistance you're wanting with 4 to 6 wraps to make your coil.

 

[jun0felix]

ugh, i forgot that we use different measures overhere ? pardon messieurs mesdames

 

[zuriel403]

First of all I want to make it clear that I dont sell this babies. It just happened that I am an avid fan of this particular atomizer, the same as I love my reos.

This is how an era looks in our beloved reo. I've been using them for quite sometime and all I can say it makes the "REO EXPERIENCE" even great which is awsome to start with.








Sorry i havent change my coil in a week.

 

[urquidezj]

I'm gonna do 3 wraps of 30 on my mini when they get here, oh yeah! Haha

 

[urquidezj]

Pretty awesome, so using em is the same as using it with any other arty? Never used a reo, master rebuilder when it comes to attys, but a reo is new territory for me