1. Take part in the #WeAreVapor campaign

    Dear Guest, 

    The  #WeAreVapor campaign has just launched and needs your help. This is a massive push to get vapers and vapor businesses visible, and make Congress aware of the Cole-Bishop amendment. It is being organised by the Vapor Technology Association. 

    Please take a minute of your time to take a look at the site to see how you can get involved. 


    Dismiss Notice

EVOD Atomizer question

Discussion in 'Tanks, clearomizers and drop-in coils' started by Glenn54, Dec 15, 2013.

Thread Status:
Not open for further replies.
Image has been removed.
URL has been removed.
Email address has been removed.
Media has been removed.
  1. Glenn54

    Glenn54 Super Member ECF Veteran

    Dec 9, 2009
    New York
    Today I decided to rebuild my wifes Kanger ProTank Mini 2 EVOD/atomizer. Lo and behold when I took this thing apart I see that the Res-wire and Nores-wire are sodered together.

    So my question is what kind of solder is this? I would believe these are made in China.
  2. Glenn54

    Glenn54 Super Member ECF Veteran

    Dec 9, 2009
    New York
  3. DavidOck

    DavidOck ECF Guru ECF Veteran

    Supporting member
    Jan 3, 2013
    Eatonville WA
    Don't recall atm the method, may be a variation on silver-solder.

    But I recoil all mine with just resistance wire, like the "original" Kanger heads.
  4. Traver

    Traver Ultra Member ECF Veteran

    Supporting member
    Oct 28, 2010
    The Aspires are made the same way but I don't know what kind of solder is used.
    If you have soldering iron you can see if it will melt the the solder. If it melts it will be soft solder the kind found in places like Radio Shack. If the soldering iron doesn't melt it then they probably using a silver solder.

    Most of my experience is with silver solders and I don't which soft solders are safe to use.
Thread Status:
Not open for further replies.

Share This Page