Flat 510 Buzz Pro TopCap

Discussion in 'Buzz Mods' started by pocketlint_vap0r, Jan 31, 2012.

Thread Status:
Not open for further replies.
Image has been removed.
URL has been removed.
Email address has been removed.
Media has been removed.
  1. pocketlint_vap0r

    pocketlint_vap0r Moved On

    Joined:
    Jan 2, 2012
    Location:
    Alabama
    I want a flat 510 connector like the rest of them. The buzz pro is a great device, I've had the pleasure of trying other VV devices and i still prefer my BP but why the raised connecter?

    I would really like to see it possible in the future to buy a flat and "flush" 510 connector so my tanks look neat. Changing the connector is no issue so i have faith, you'd really have to own one to see how well this thing is put together. The top cap has a rotating piece inside so the wires don't twist when you put a new one on or unscrew it. No soldering is required to change them, the red (hot) wire has a washer piece attached to a screw in the center of the spinnin mechanism that keeps the wire from twisting. Unscrew that, remove the washer and place the new cap on.

    So, can ihaz flat cap? :blush:
     
  2. hificat101

    hificat101 Super Member Verified Member ECF Veteran

    Joined:
    Nov 18, 2011
    Location:
    PA
    If it makes you feel better, my Prodigy V3 top cap has a flat 510 connection, but the adaptor is MUCH bigger, and MUCH heavier than the one on the Buzz. Have a look. The 510 is the one on the left.

    Prodigy V3 Adapter
     
  3. hificat101

    hificat101 Super Member Verified Member ECF Veteran

    Joined:
    Nov 18, 2011
    Location:
    PA
    I'm pretty happy with the way it is now. It has a little depression ther that can catch juice, and I'm very impressed that it weighs less than my fixed 3.7v Prodigy that has no electronics.

    Also Mike, I'm just really happy with my Rootbeer Buzz you just sent me. The color is a bit redder, and less coppery than the picture on the site, but it is REALLY nice. Very happy customer.
     
  4. BuzzKill

    BuzzKill Unregistered Supplier ECF Veteran

    Joined:
    Nov 6, 2009
    Location:
    Central Coast Ca.
    Cool , good to hear that , colors NEVER look right on a monitor !
     
  5. FreeFire

    FreeFire Super Member ECF Veteran

    Joined:
    Jan 8, 2012
    Location:
    Twin Cities Minnesota
    Especially on an "uncalibrated" monitor...LOL
     
  6. BuzzKill

    BuzzKill Unregistered Supplier ECF Veteran

    Joined:
    Nov 6, 2009
    Location:
    Central Coast Ca.
    Are'nt they all ! LOL
     
  7. synic

    synic Senior Member Verified Member ECF Veteran

    Joined:
    Jul 15, 2011
    Location:
    SLC, Utah
    I would also like a flat top cap, so I could flush mount a genesis atomizer or other tanks. I would pay some good money for two of these for my woody buzz pros.
     
  8. Hostile

    Hostile Senior Member Verified Member ECF Veteran

    Joined:
    Feb 24, 2012
    Location:
    Orange County
    I'd be all for one or three..
     
  9. synic

    synic Senior Member Verified Member ECF Veteran

    Joined:
    Jul 15, 2011
    Location:
    SLC, Utah
    I know the topcap would have to be taller and heavier, but honestly, this is why I don't use the Buzz with RBA's. It needs a flush mount for stuff like the Z-Atty, or else it just looks like a delicate lollipop.
     
  10. Jim532

    Jim532 Moved On ECF Veteran

    Joined:
    Apr 27, 2012
    Location:
    Nottingham UK
  11. Koman

    Koman Moved On ECF Veteran

    Joined:
    Jan 7, 2010
    Location:
    lv
  12. Section1

    Section1 Senior Member Verified Member ECF Veteran

    Supporting member
    Joined:
    Jul 28, 2010
    Location:
    Metropolis, IL, Earth
    Does look nice. Great work. Now if I just had a lathe and knew how to use it.......... and a BP. Would like my Infinity to have a flat top though.
     
Thread Status:
Not open for further replies.

Share This Page