Sub Ohm Dual Vertical Coil (DVC) Replacement Head for FreeMax Starre
Available in 0.25 ohm and 0.5 ohm (+/- .2) resistance.
These replacement sub ohm coil heads are intended for the FreeMax StarreSub Ohm Clearomizer. These coils will also work in the Vapeston Maganus Sub Ohm Clearomizer. Dual vertical coils (DVC) use medical grade cotton and USA-made wire: they wick very well, offer great flavor and vapor, and have a longer life-span.
Changing the coil is very easy: simply unscrew the base, unscrew the old coil and screw in a new one. Make sure to prime the coil by dripping some e-liquid onto the cotton in the center and on the sides. To fill the Starre, hold the clearomizer tank up-side-down, unscrew the base and fill with 5 ml of e-liquid (be careful not to get any e-liquid down the center tube). Using a needle-tip bottle or a syringe makes this task effortless. Finally, screw the base back on and you are ready to vape. Please allow a few minutes for the e-liquid to fully saturate the coil if using a brand new coil.
PLEASE NOTE: The FreeMax Starre uses sub ohm coils and should ONLY be used with devices capable of handling sub ohm coils! If using a mechanical mod, please only use High Drain batteries with a high amp limit; if using a variable power mod, please use High Drain batteries in a device capable of putting out 30W or higher. NEVER use this or any sub ohm device on an eGo battery or a device that can not handle sub ohm coils. It is for your safety!
Price is for a single piece. Get a Quantity Discount when you buy 5 or more coils - click on "Quantity Pricing" in the menu above to view our quantity discounts!
Available in 0.25 ohm and 0.5 ohm (+/- .2) resistance.
These replacement sub ohm coil heads are intended for the FreeMax StarreSub Ohm Clearomizer. These coils will also work in the Vapeston Maganus Sub Ohm Clearomizer. Dual vertical coils (DVC) use medical grade cotton and USA-made wire: they wick very well, offer great flavor and vapor, and have a longer life-span.
Changing the coil is very easy: simply unscrew the base, unscrew the old coil and screw in a new one. Make sure to prime the coil by dripping some e-liquid onto the cotton in the center and on the sides. To fill the Starre, hold the clearomizer tank up-side-down, unscrew the base and fill with 5 ml of e-liquid (be careful not to get any e-liquid down the center tube). Using a needle-tip bottle or a syringe makes this task effortless. Finally, screw the base back on and you are ready to vape. Please allow a few minutes for the e-liquid to fully saturate the coil if using a brand new coil.
PLEASE NOTE: The FreeMax Starre uses sub ohm coils and should ONLY be used with devices capable of handling sub ohm coils! If using a mechanical mod, please only use High Drain batteries with a high amp limit; if using a variable power mod, please use High Drain batteries in a device capable of putting out 30W or higher. NEVER use this or any sub ohm device on an eGo battery or a device that can not handle sub ohm coils. It is for your safety!
Price is for a single piece. Get a Quantity Discount when you buy 5 or more coils - click on "Quantity Pricing" in the menu above to view our quantity discounts!
