Gdeal Bottom Feeders (Tutorials/Parts List/Pictures) - Please take questions to the spec thread
- Thread starter ThreeDJ16
- Start date
- th_trl_thread_readers 0
- Status
WTH happened to Drunk_J & Gdeal??????
Last edited:
Some of the parts lists' links seem to be broken or obsolete. These are the actual part numbers with the exception of the "light" switch spring.
GDeal Squonkers Complete Parts List
or
Vented Fasteners
* - Either 3 Ball tact switches or 2 Ball tact and one Alps.
** - Drill out the Vapage bottle cap to 11/64”
*** - Flatten the head and grind down the circumference to 5.5mm diameter
GDeal Squonkers Complete Parts List
- 2x Stainless M2 Screws (GDNA) Mcmaster-Carr # 93395A141
- 2x M2 Brass Press Fit Inserts (GDNA) Mcmaster-Carr # 94510A360
- 10’ Tygon PVC Tubing (Both) Mcmaster-Carr # 6546T93
- 1.3mm Hex Key (GDNA) Mcmaster-Carr # 7289A33
- Brass M3 nut (Peko) McMaster-Carr # 93187A100
- 4x Brass M2 nut (Peko) McMaster-Carr # 90690A030
- Brass M3 Pan Head Screw (Peko) McMaster-Carr # 90928A305
- 2x Ball Tact Switches* (GDNA) Mouser # KSJ0M43180SHLFT
- Alps Low Profile Tact Switch* (GDNA) Mouser # SKQGAKE010
- M3 x 4mm Hex Spacer (Both) Mouser # 855-R30-1010402
- Keystone 5230 Battery Spring (GDNA) Mouser # 534- 5230
- Keystone 5209 Battery Spring (Peko) Mouser # 534-5209
- Keystone 7326 Solder Lug (Peko) Mouser # 534-7326
- Keystone 7332 Solder Lug (Peko) Mouser # 534-7332
- 2x 6v 7a Fuses (GDNA) Mouser # 2920L700SLPR
- 2x 3/16” Cylinder Magnets (GDNA) KJMagnetics # D36-N52
- 2x Closure Magnets (Peko) KJMagnetics # D32-N52
- 2x sets of Mini T Connectors (GDNA) Hobbyking # 015000054
- Fat Daddy Vapes Classic 510 (Both) “Classic 510 Inserts 3pk”
- Atomizer Gasket 1.5 x 11.5mm (Both) the Oring Store # N1.50X011.5
- 510 Jack Gasket 1.5 x 3.5mm (Both) the Oring Store # N1.50X003.5
- 2x brass washers (GDNA) Fastenal # 0152259
- Small #6-32 SS Hex Nut (Both) Fastenal # 0148193
- 9ml Squeeze Bottle (Both)** Vapage # VPA-65
- ⅜” Solder Lug (Peko) Allied Electronics # 70211129
- 2mm x 75mm Threaded Rod (Peko) Scale Hardware # TROD-20-B
- 1-72 Brass Screw (Peko) Micro Fasteners # HBB0102
- 1-72 Brass Nut (Peko) Micro Fasteners # HNBS0172
- Actuator Spring “Heavy” (Peko) stocksprings.drtempleman # CDH-0455-0052-M
- Actuator Spring “Light” (Peko) stocksprings.drtempleman # haven't found this one yet...
- Actuator Magnets “Superlight” (Peko) SuperMagnetMan.Net # Ring-R1004
- 18ga Flexible RC wire in Black and Red (Peko Wire Mods)
- 20ga Wire in Black and Red (GDNA)
- 24ga Wire in Black, Blue, Red, and Yellow (GDNA)
- Evolv DNA20, 25, 30, or 40 chip (GDNA)
- #6-32 SS Pan-Head Vented Screw (Both)***
or
Vented Fasteners
* - Either 3 Ball tact switches or 2 Ball tact and one Alps.
** - Drill out the Vapage bottle cap to 11/64”
*** - Flatten the head and grind down the circumference to 5.5mm diameter
Last edited:
whats the lowest you can run one of these things? i have a .18 currently on mine loooool
Thanks B2L for the lead on a cerakote shop. Beautiful job. Got in the mood to finally upgrade my rig. Building a v4.2 with large screen. Going to have it black with the Hitcher's thumb in blue with the Answer of the Life, the Universe and Everything (42) stamped on the other side. Thought kind of funny since I am using the excuse that I am building it for my 42nd. I have always thought of phones with web access as Hitch Hiker's Guides, now I'll have my electronic thumb, all I need to do now is pick a towel.
"Forty-two," said Deep Thought, with infinite majesty and calm.” happy B-day. Sumratio.
Does any one make wooden or stab wood sleaves/shells for these Gdna's? I pretty sure I saw Mark Todd with what looked like a Gdna 40 but with a wooden shell in one of his waffles
Does any one make wooden or stab wood sleaves/shells for these Gdna's? I pretty sure I saw Mark Todd with what looked like a Gdna 40 but with a wooden shell in one of his waffles
pdib made a batch of them a while back. Not sure if he has any plans to do more in the future or not being gung ho into Lil' Pinch production but you may want to PM him and find out.
ok thanks i'll send him a message, I was a little unsure if this was the right place for that question.
Finally got my Electronic Thumb finished. OCD Mods rocks. He had some trouble with the cerakote bonding to the filler primer I used to fill in the print lines but he fought through it.
I did a bit of maintenance / rework on my gdeal mods this past weekend. After a year or more of daily use, they were ready for it. Here they are, all working perfectly again:
Yes, I have a quite a few "nicer" mods than these, but none that are as practical.
Yes, I have a quite a few "nicer" mods than these, but none that are as practical.
Turned out looking great!
I did a bit of maintenance / rework on my gdeal mods this past weekend. After a year or more of daily use, they were ready for it. Here they are, all working perfectly again:
Yes, I have a quite a few "nicer" mods than these, but none that are as practical.
- Status
