The SMY god 180 and 180S use the firing button in conjunction with the 2 smaller buttons to perform several other adjustment settings besides being just the atomizer fire button. I have disassembled my 180S and removed the circuit board as well as the fire switch button 'pre-plunger' and have found answers to a few problems you might eventually experience with either of the units, 180 and 180S
1. 5 click on /off fails to operate until many tries.
2. screen reads untrue problems or ignores preference settings.
3. screen refuses to recognize the 3 button push signal to switch to selections screen
4. screen states vape is too hot and shuts down atomizer when temp screen is nowhere near 40 c.
Post to me if the above or similar fire button problems occur as I have found several ways you can both test and fix any fire button operational problems. Basicly it's the movement of the pre plunger. This NON ELECTRICALLY applies pressure to the true black fire switch button but the depth of the pre plunger push is critical so the God senses the proper command intention.
1. 5 click on /off fails to operate until many tries.
2. screen reads untrue problems or ignores preference settings.
3. screen refuses to recognize the 3 button push signal to switch to selections screen
4. screen states vape is too hot and shuts down atomizer when temp screen is nowhere near 40 c.
Post to me if the above or similar fire button problems occur as I have found several ways you can both test and fix any fire button operational problems. Basicly it's the movement of the pre plunger. This NON ELECTRICALLY applies pressure to the true black fire switch button but the depth of the pre plunger push is critical so the God senses the proper command intention.
Last edited:
