Heatvape Invader Mini 50W - Temp Control and Regular
$69.95
Only $66.45 after Newsletter VIP discount
Heatvape Invader Mini 50W is a rugged temperature sensing mod built to be water resistant, dust resistant and shock proof. Definitely one of the most durable and unique mods in industry. It is a must have for those who exposed to water elements and definitely for those who cape in more rugged environments.
The Invader Mini is a power regulated digital switch-MODE DC-DC converter controlled personal vaporizer. It has a small .69” diagonal OLED screen. The Invader Mini will automatically detect whether a temperature sensing or standard coil is attached. It supports reverse protection for input terminal and synchronous adjust for voltage output - meaning it will adjust if needed during your vape to provide proper voltage output.
Specifications:
- Waterproof Level: IPX4 (not submersive but splash protective)
- Innovative 510 thread with adjustable connector cap to fit any 510 atomizers without gap
- Dimension: 31.5 by 39.5 by 102mm
- Materials (eco-friendly): Zinc Alloy + Silicon + Brass
- Output Power: 1W-50W
- Output Voltage: 1V-9.9V
- Ohm Limit: 0.1-1.0 Ohm in TC Mode, 0.16-2.0 Ohm in normal Mode
It detects when you have a nickel build attached (such as the Heatvape EcoTank & coils) and will automatically enter temperature control mode. It uses a single 18650 battery and includes reverse battery protection. In normal mode it will fire down to 0.16ohms and in temperature mode it will fire down to 0.1ohms.
Summary of Operations:
- Power on: Click Fire button 5 times to turn on the device.
- Locked Mode: Click Fire button 5 times within 0.7 seconds to lock the device. When locked, the device will not fire and the output power will not adjust accidentally. To unlock the device, just click Fire button another 5 times within 0.7 seconds.
- Max Temperature Adjust Mode: in Locked Mode, hold Fire button and "-" Button simultaneously for 2 seconds to enter this mode. Once this mode entered, the max temperature will be displayed. The Fire button and "-" are used to adjust the max temperature. To save the chose temperature setting and exit, press the Fire button.
- Stealth Mode: in Locked Mode, hold Fire button and "-"simultaneously for 5 seconds to enter Stealth Mode. To exit this mode, press Fire button and "-" simultaneously for 5 seconds. (This setting is stored to internal flash memory, and remains if the battery is removed)
- Right Mode and Left Mode: in Locked Mode, hold the Fire button and "+" button simultaneously for 5 seconds to flip the display. This allows for maximum flexibility, as well as accommodating left handed use.
- Power Locked Mode: hold "+" and "-" buttons for 2 seconds will place the device in Power Locked Mode. In this mode, the MOD will operate normally but you will not be able to change the power output setting. Hold "+" and "-" buttons for 2 seconds to exit the mode.
- New Coil Up Same Down: when connecting atomizer to the device, if it's new, click "+". If it's same old one, then click "-" to keep the setting.
- Auto Shut Off: with no atomizer the device turns off after 2 minutes, with an atomizer installed the device will turn off after 50 minutes. When it shuts off the settings will go to default, so it's VERY important to note how to properly use this device. Simply turn the device off to keep your settings, if you plan to set it down for more than 50 minutes.
What You Get:
- Heatvape Invader Mini 50W Mod
- User Guide
- Acrylic Box Packaging with Authenticity Sticker
- Does not come with a battery - you will need to purchase a battery that provides at least 20A output such as those in our eFest purple series.
