1. Take part in the #WeAreVapor campaign

    Dear Guest, 

    The  #WeAreVapor campaign has just launched and needs your help. This is a massive push to get vapers and vapor businesses visible, and make Congress aware of the Cole-Bishop amendment. It is being organised by the Vapor Technology Association. 

    Please take a minute of your time to take a look at the site to see how you can get involved. 


    Dismiss Notice

IClear 30 coild not reading or firing on my VTR and not firing on my Evod VV. Please help.

Discussion in 'Tanks, clearomizers and drop-in coils' started by Frogzx, Feb 11, 2014.

Thread Status:
Not open for further replies.
Image has been removed.
URL has been removed.
Email address has been removed.
Media has been removed.
  1. Frogzx

    Frogzx Senior Member ECF Veteran

    Dec 6, 2013
    This is my..third I believe, coil head that i've tried on this. All from the same little box of packaged heads and such. It doesnt read the ohm on my VTR, and wont fire on it or my VV. Am I doing something wrong here? I bought 10 coils and expected them all to work...
  2. darkestdayz

    darkestdayz Full Member

    Dec 11, 2013
    St Louis, MO US
    Maybe it's not connecting with the pin? I have an MVP, not a VTR, but sometimes the pin gets pushed down too far and won't connect with the pin on the bottom of the 30? I have this issue more with trying to use my 30B after using my 30, the 30 seems to push it down further. I use tweezers to pull it up a little.
Thread Status:
Not open for further replies.

Share This Page