Indulgence - First Look

Status
Not open for further replies.

Di

ECF Guru
ECF Veteran
Oct 30, 2008
10,164
16
*Australia*
Do like I'm gonna do. Just order one. Make sure you like it (How cold you not) and then order 5-8 more. So if anything goes wrong with bans you have extas, and the batteries you can get anywhere. And its compatible with all kinds of atomizers so you'll be able to get different attys. So ban or no ban youll be set. Only would need liquid! That is why I am buying a few after the trial one I am buying.


sounds like a good plan to me Josh, go for it hun ------:):)
 

Di

ECF Guru
ECF Veteran
Oct 30, 2008
10,164
16
*Australia*
BD
no it is a 18350 battery

with an additional option for 6 volts as an add on extra.
6v kit(meaning add-on) is 2 x 16350 batteries and 1cup.
And this replaces the original battery housing-------

these will be protected batterys only.


as far as I know the starter kit is the way to purchase

and then to add other options and extras------






So, what does the "add-on" to 6v do? 16340 from memory is a 3.7v battery.
So 2x3.7 that is like 7.4V. So, am I right to assume that "add-on" part has some sort of resistor/voltage limiting device in it? Thanks guys.

Cannot wait any longer![/quote]

No--- I made a mistake it is 18350+protection battery for the starter kit @ 3.7volts

no there is no resistor voltage limiting device in this ecig, the design is solder free & without wires

and for the 6 volts will be 2 x cr123's+protection @ 3volts each

and of course we will also sell the Hi Volts Attys to use with the Higher voltage of 6 volts.

And did I hear right, that the main unit will come in gold and titanium(as in the photos)?

Yes, you heard right -----GOLD - SILVER - TITANIUM--
 
Last edited:

Di

ECF Guru
ECF Veteran
Oct 30, 2008
10,164
16
*Australia*
Thanks, Di
Just did not know they were making protected 3v cr123 batteries...

Are we going to get them before xmas?



Hi sergey

these batteries have been specially manufactured for the Indulgence e-cig
--- and absolutely - THEY ARE PROTECTED --


YES you will be able to order them before xmas,
we have heard from the manufacturer that we can expect our first shipment to be available for sale in shop on about the 18th ----

that means that you wont actually have it under your xmas tree
or in your stocking on the big day,----
but wont it be nice to know that you do own it --
and that you will have it really soon after xmas ??




The new 3.7v protected 18350 batts in the kit put out 1.2amps @ 900mAh (true mAh)
so the 3.7v starter kit will be impressive on any and all attys


Then there's the 3000mAh 18650 batts - they will be in stock upon the release of the Extended Cup - (which is also the holder for the 6 volts option).
we will also sell the Hi Volts Attys to use with the Higher voltage of 6 volts.
 
Last edited:

Di

ECF Guru
ECF Veteran
Oct 30, 2008
10,164
16
*Australia*
If you are concerned about safety, you can also get 3.0v LiFePo4 CR123 batteries. LiFePo4 chemistry is inherently safer than standard Li-Ion.

hi boon

thanks so much
yes, we have heard of these lifep04 battys,
we have been looking at them recently---

thanks for the heads up on these.............
 

googled

Super Member
ECF Veteran
Mar 6, 2009
512
2
ukvapers.com
Hi sergey

these batteries have been specially manufactured for the Indulgence e-cig
--- and absolutely - THEY ARE PROTECTED --


YES you will be able to order them before xmas,
we have heard from the manufacturer that we can expect our first shipment to be available for sale in shop on about the 18th ----

that means that you wont actually have it under your xmas tree
or in your stocking on the big day,----
but wont it be nice to know that you do own it --
and that you will have it really soon after xmas ??




The new 3.7v protected 18350 batts in the kit put out 1.2amps @ 900mAh (true mAh)
so the 3.7v starter kit will be impressive on any and all attys


Then there's the 3000mAh 18650 batts - they will be in stock upon the release of the Extended Cup - (which is also the holder for the 6 volts option).
we will also sell the Hi Volts Attys to use with the Higher voltage of 6 volts.

I'm speechless. The bit about the high volt attys adaptor is the icing on the cake. Well done Eastmall.
 

Di

ECF Guru
ECF Veteran
Oct 30, 2008
10,164
16
*Australia*
Well, Santa better get his fat a** in gear, he will have alot of theese to deliver!

Now how about an erotic vaping fetish video, Stormy, Di, Lily, anyone :evil:


Well, cerios


Stormy and Lily and I did our bit here for you----

I thought you guys might do that bit for us !!!!!!
:pervy::pervy::pervy:


YES you will be able to order them before xmas,
we have heard from the manufacturer that we can expect our first shipment to be available for sale in shop on about the 18th ----

that means that you wont actually have it under your xmas tree
or in your stocking on the big day,----
but wont it be nice to know that you do own it --
and that you will have it really soon after xmas ??
:):)
 

rocketvapor

Super Member
ECF Veteran
Jul 19, 2009
383
0
Rockledge, FL
Touche! Ya got me with that one!

Be fair now, I did allow Di to tie me to a chair and give me a light oiling with some 555...:)

Indulgence-First-Look-05.jpg


(BTW, did anybody else find themselves watching Lily's hands instead of the new PV? Very hypnotic IMO). :oops:


.
 

Di

ECF Guru
ECF Veteran
Oct 30, 2008
10,164
16
*Australia*
I'm speechless. The bit about the high volt attys adaptor is the icing on the cake. Well done Eastmall.


hi googled

you like our cake huh???????
:rolleyes::rolleyes::rolleyes:

the add-on of the longer battery cup was actually designed for the ability to vape with the 18650 battery---

hahaha anyone see Di's favourite vapeing bliss in this bit ?????????:rolleyes::rolleyes:

but it was quickly discovered that with the addition of 2 x cr123 protected batteries - haha- voila - 6 volts vaping could be achieved--
and wow - what do ya know -
with Hi Volts attys, and a made for us protected battery --
the 6 volts optional addon was born ----


This optional 6 volts optional addon --
and the Hi Volts attys ----
will be available very soon after the initial launch of Indulgence into East Mall shop for purchase.


Keep your fingers near those bootons people,
we have had so many when can I buy inquiries, from world wide East Mall customers,
---I don't know how long the initial launch run will last ----
 

Di

ECF Guru
ECF Veteran
Oct 30, 2008
10,164
16
*Australia*
Wait- Gold, Silver, and Titanium? All launched together? Can you Mix and Match? This is gonna be fun!

Hi spiker,

actually as I understand it

it will be a staggered launch-

first run off will be silver,
then next will be the Gold,
then will come the Titanium,

The production line has to have
minor changes factored
in for each colour -----

I think at this time this is the plan,
but I am not 100% sure----
will know better in a few days time ----


but yes, I think this is a brilliant idea buy them all at this price, and mix and match the bits---------

mmmmmmmm -- TITANIUM with GOLD end Caps !!!!!!
:pervy::pervy::pervy:
 

Di

ECF Guru
ECF Veteran
Oct 30, 2008
10,164
16
*Australia*
Even More for you ----

omgtxt.gif


Now when you go to purchase your Indulgence Starter Kit-----
in the drop down box
include 1 atomiser and thread of choice
(you are choosing which free atomiser & thread)
and we then include the other 3 threads into your starter kit.:):)

Even More Again ----

wooohooo.gif


Hi Volts Atomizer will be same price as our normal Atty-----
 
Status
Not open for further replies.

Users who are viewing this thread